From b177907029ab15c355e99ad4cb79715690107e67 Mon Sep 17 00:00:00 2001 From: Trivernis Date: Tue, 4 Dec 2018 11:51:10 +0100 Subject: [PATCH] Updated README --- README.md | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/README.md b/README.md index 381e737..765d416 100644 --- a/README.md +++ b/README.md @@ -10,6 +10,25 @@ several sensors (Gyroscope, Ultrasonic, Camera) and a relay for switching lights and off. The controlling part is achived by using pygame to get direct access to the controller events. The software itself is splitted into several libraries for handling specific tasks. +Requirements +--- + +You need to build a basic Spyder setup yourself. This consists of a raspberry +pi as controlling unit, a gyroscope, a camera, two relays, an ultrasonic sensor and a temperature +sensor. Notice that you could manipulate the main program (`main.py`) to remove or add sensors. +The standard pins are: + +Sensor | Pins +------------|------- +Ultrasonic | 11, 7 +Motor-Relay | 16 +Light-Relay | 15 +Temperature | 11, 14 + +The light and the motor are switched on and off with the relay, because the raspberry pi +doesn't have enough energy to power all motors and lights. So use a seperate energy source +to power them. + Install ---