This line uses the Display trait for io::ErrorKind which was
stabilized in Rust 1.60.0. We can set MSRV all the way back to
1.57.0 by replacing it with a pretty-print.
Closes#2460.
* add Tree::swap_split_in_direction()
* add swap_view_{left,down,up,right} commands, bound to H,J,K,L
respectively in the Window menu(s)
* add test for view swapping
Change the layout of existing split view from horizontal to vertical and
vica-versa. It only effects the focused view and its siblings, i.e. not
recursive.
Command is mapped to 't' or 'C-t' under the Window menus.
Inserting these with the `HashMap::insert` method evades the call
to `Selection::ensure_invariants`. The effect is that the scratch
buffer (or other buffers opened through these code-paths) can start
with a selection at (0, 0), when a file with equivalent contents ("\n")
would start with (0, 1).
I.e.:
hx
and
touch f
hx f
start with different selections even though they have an equivalent
Rope. With this change they both start with (0, 1).
* feat(commands): better handling of buffer-close
Previously, when closing buffer, you would loose cursor position in other docs.
Also, all splits where the buffer was open would be closed.
This PR changes the behavior, if the view has also other buffer
previously viewed it switches back to the last one instead of the view
being closed. As a side effect, since the views are persisted,
the cursor history is persisted as well.
Fixes: https://github.com/helix-editor/helix/issues/1186
* Adjust buffer close behavior
* Remove closed documents from jump history
* Fix after rebase
* Make `:write` create nonexistent subdirectories
Prompting as to whether this should take place remains a TODO.
* Move subdirectory creation to new `w!` command
* Add runtime language configuration (#1794)
* Add set-language typable command to change the language of current buffer.
* Add completer for available language options.
* Update set-language to refresh language server as well
* Add language id based config lookup on `syntax::Loader`.
* Add `Document::set_language3` to set programming language based on language
id.
* Update `Editor::refresh_language_server` to try language detection only if
language is not already set.
* Remove language detection from Editor::refresh_language_server
* Move document language detection to where the scratch buffer is saved.
* Rename Document::set_language3 to Document::set_language_by_language_id.
* Remove unnecessary clone in completers::language
* feat(clipboard): reintroduce win32yank for wsl2 linux
* refactor(clipboard): adjust win32yank position to not interrupt wayland/x11
Co-authored-by: jiqb <gthbji@ml1.net>
* Move top level lsp config to editor.lsp
This is mainly done to accomodate the new lsp.signature-help config
option that will be introduced in https://github.com/helix-editor/helix/pull/1755
which will have to be accessed by commands. The top level config
struct is split and moved to different places, making the relocation
necessary
* Revert rebase slipup
* add basic completion replay
* use transaction as the last completion
* completion replay only on trigger position
* cache changes in CompletionAction
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Show infobox to hint textobjects with `mi` and `ma`
* Add note to infobox than any pair of characters will work too
The wording could probably be a little more clear, but I wanted to
keep it short but still accurate.
* Don't allocate a vec for the static help text
* Fix bug where `mi<esc>` would swallow next input and persist infobox
* Better help text for arbitrary pair matching in textobject selection
* Add way to add fake pending key data below status, use with `mi`/`ma`
This is a bit hacky as it makes use of global state which will end
up managed in multiple places, but has precedent in the way autoinfo
works. There should probably be a bigger refactor to handle this
kind of state better.
* Return early on anything other than `mi` and `ma` for autoinfo
* Remove "ascii" from help text with `mi` and `ma`
* Update helix-term/src/ui/editor.rs
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* impl auto pairs config
Implements configuration for which pairs of tokens get auto completed.
In order to help with this, the logic for when *not* to auto complete
has been generalized from a specific hardcoded list of characters to
simply testing if the next/prev char is alphanumeric.
It is possible to configure a global list of pairs as well as at the
language level. The language config will take precedence over the
global config.
* rename AutoPair -> Pair
* clean up insert_char command
* remove Rc
* remove some explicit cloning with another impl
* fix lint
* review comments
* global auto-pairs = false takes precedence over language settings
* make clippy happy
* print out editor config on startup
* move auto pairs accessor into Document
* rearrange auto pair doc comment
* use pattern in Froms
* feat(commands): shrink_selection
Add `shrink_selection` command that can be used to shrink
previously expanded selection.
To make `shrink_selection` work it was necessary to add
selection history to the Document since we want to shrink
the selection towards the syntax tree node that was initially
selected.
Selection history is cleared any time the user changes
selection other way than by `expand_selection`. This ensures
that we don't get some funky edge cases when user calls
`shrink_selection`.
Related: https://github.com/helix-editor/helix/discussions/1328
* Refactor shrink_selection, move history to view
* Remove useless comment
* Add default key mapping for extend&shrink selection
* Rework contains_selection method
* Shrink selection without expand selects first child
* feat: Update settings at runtime
fix the clippy warning
* update the documentation
* use to_value instead of to_vec+from_value
* drop the equal
* remove an useless comment
* apply suggestion
* feat(ui): file encoding in statusline
Display file encoding in statusline if the encoding
isn't UTF-8.
* Re-export encoding_rs from core
From there it can be imported by other mods
that rely on it.
* tmp add code for dedent
* finish normal_mode with dedent behavior
* use function pointer
* rebase from origin
* check dedent condition inside normal_mode implementation
* using if let...
* fix check
* using char_is_whitespace instead of ch.is_whitespace
* fix clippy
* abstract restore_indent function
* Move `runtime/themes/base16_default_terminal.toml` to
`base16_theme.toml` alongside `theme.toml`
* Use `terminfo` crate to detect whether the terminal supports true
color and, if the user has no theme configured and their terminal does
not support true color, load the alt default theme instead of the
normal default.
Remove `terminfo` dependency, use `COLORTERM` env instead
Prevent user from switching to an unsupported theme
Add `true-color-override` option
If the terminal is wrongly detected to not support true color,
`true-color-override = true` will override the detection.
Rename `true-color-override` to `true-color`
* Macros WIP
`helix_term::compositor::Callback` changed to take a `&mut Context` as
a parameter for use by `play_macro`
* Default to `@` register for macros
* Import `KeyEvent`
* Special-case shift-tab -> backtab in `KeyEvent` conversion
* Move key recording to the compositor
* Add comment
* Add persistent display of macro recording status
When macro recording is active, the pending keys display will be shifted
3 characters left, and the register being recorded to will be displayed
between brackets — e.g., `[@]` — right of the pending keys display.
* Fix/add documentation
Tree sitter returns an index referring to the position of the scope in
the scopes array. We can use that same index to avoid a hashmap lookup
and instead store the styles in an array.
This currently stores the styles in both a map and an array because the
UI still uses hashmap lookups, but it's a reasonable tradeoff.
fixes#1136
* removed a log::info
* removed temp.rs
* cargo clippy no longer complains
* new get_lang_server function
* get_lang_server is now launch_language_server
* launch_lang_server will now close the previous one
* better code readability
* remove resfresh_ls(and a wrong comment)
* squashed WIP commits
* hide_gitignore working with config
* pass reference to new config parameter of file_picker()
* update config option name to match name on walk builder
* add comments to config and documentation of option to book
* add git_ignore option to WalkBuilder within prompt in commands.rs
* WIP: add FilePickerConfig struct
* WIP: cleanup
* WIP: add more options including max_depth
* WIP: changed defaults to match ignore crate defaults
* WIP: change WalkBuilder in global_search() to use config options
* WIP: removed follow_links, changed max_depth to follow config setting
* WIP: update book with file-picker inline table notation
* update documentation for file-picker config in book
* adjusted to [editor.file-picker] in book configuration.md
* adjust comments in editor.rs to be doc comments, cleanup
* adjust comments
* adjust book
* helix-view/view: impl method to remove document from jumps
* helix-view/editor: impl close_document
* helix-view/editor: remove close_buffer argument from `close`
According to archseer, this was never implemented or used properly. Now
that we have a proper "buffer close" function, we can get rid of this.
* helix-term/commands: implement buffer-close (bc, bclose)
This behaves the same as Kakoune's `delete-buffer` / `db` command:
* With 3 files opened by the user with `:o ab`, `:o cd`, and `:o ef`:
* `buffer-close` once closes `ef` and switches to `cd`
* `buffer-close` again closes `cd` and switches to `ab`
* `buffer-close` again closes `ab` and switches to a scratch buffer
* With 3 files opened from the command line with `hx -- ab cd ef`:
* `buffer-close` once closes `ab` and switches to `cd`
* `buffer-close` again closes `cd` and switches to `ef`
* `buffer-close` again closes `ef` and switches to a scratch buffer
* With 1 file opened (`ab`):
* `buffer-close` once closes `ab` and switches to a scratch buffer
* `buffer-close` again closes the scratch buffer and switches to a new
scratch buffer
* helix-term/commands: implement buffer-close! (bclose!, bc!)
Namely, if you have a document open in multiple splits, all the splits
will be closed at the same time, leaving only splits without that
document focused (or a scratch buffer if they were all focused on that
buffer).
* helix-view/tree: reset focus if Tree is empty
* Launch with defaults upon invalid config/theme
* Startup message if there is a problematic config
* Statusline error if trying to switch to an invalid theme
* Use serde `deny_unknown_fields` for config
* Implement `hx --tutor` and `:tutor` to load `tutor.txt`
* Document `hx --tutor` and `:tutor`
* Change `Document::set_path` to take an `Option`
* `Document::set_path` accepts an `Option<&Path>` instead of `&Path`.
* Remove `Editor::open_tutor` and make tutor-open functionality use
`Editor::open` and `Document::set_path`.
* Use `PathBuf::join`
Co-authored-by: Ivan Tham <pickfire@riseup.net>
* Add comments explaining unsetting tutor path
Co-authored-by: Ivan Tham <pickfire@riseup.net>
* improve idle completion trigger
* add completion-trigger-len to book
* rename semantics_completion to language_server_completion and optimize idle completion trigger
* add docs
* clean up
* remove
* more
* Update helix-view/src/macros.rs
Co-authored-by: Ivan Tham <pickfire@riseup.net>
Co-authored-by: Ivan Tham <pickfire@riseup.net>
* Implement shell interaction commands
* Use slice instead of iterator for shell invocation
* Default to `sh` instead of `$SHELL` for shell commands
* Enforce trailing comma in `commands` macro
* Use `|` register for shell commands
* Move shell config to `editor` and use in command
* Update shell command prompts
* Remove clone of shell config
* Change shell function names to match prompts
* Log stderr contents upon external command error
* Remove `unwrap` calls on potential common errors
`shell` will no longer panic if:
* The user-configured shell cannot be found
* The shell command does not output UTF-8
* Remove redundant `pipe` parameter
* Rename `ShellBehavior::None` to `Ignore`
* Display error when shell command is used and `shell = []`
* Document shell commands in `keymap.md`
* Refactor new Rect construction
Introduces methods that can be chained to construct new Rects
out of pre-existing ones
* Clamp x and y to edges in Rect chop methods
* Rename Rect clipping functions
* Add preview pane for fuzzy finder
* Fix picker preview lag by caching
* Add picker preview for document symbols
* Cache picker preview per document instead of view
* Use line instead of range for preview doc
* Add picker preview for buffer picker
* Fix render bug and refactor picker
* Refactor picker preview rendering
* Split picker and preview and compose
The current selected item is cloned on every event, which is
undesirable
* Refactor out clones in previewed picker
* Retrieve doc from editor if possible in filepicker
* Disable syntax highlight for picker preview
Files already loaded in memory have syntax highlighting enabled
* Ignore directory symlinks in file picker
* Cleanup unnecessary pubs and derives
* Remove unnecessary highlight from file picker
* Reorganize buffer rendering
* Use normal picker for code actions
* Remove unnecessary generics and trait impls
* Remove prepare_for_render and make render mutable
* Skip picker preview if screen small, less padding
* Use tree like structure to store keymaps
* Allow multi key keymaps in config file
* Allow multi key keymaps in insert mode
* Make keymap state self contained
* Add keymap! macro for ergonomic declaration
* Add descriptions for editor commands
* Allow keymap! to take multiple keys
* Restore infobox display
* Fix keymap merging and add infobox titles
* Fix and add tests for keymaps
* Clean up comments and apply suggestions
* Allow trailing commas in keymap!
* Remove mode suffixes from keymaps
* Preserve order of keys when showing infobox
* Make command descriptions smaller
* Strip infobox title prefix from items
* Strip infobox title prefix from items
- switch to use static OnceCell to calculate Info once
- pass Vec<(&[KeyEvent], &str)> rather than Vec<(Vec<KeyEvent>, &str)>
- expr -> tt to allow using | as separator, make it more like match
* Enable using color palettes in theme files.
* Add an example theme defined using a gruvbox color palette.
* Fix clippy error.
* Small style improvement.
* Add documentation for the features to themes.md.
* Update runtime/themes/gruvbox.toml
Fix the value of purple0.
Co-authored-by: DrZingo <DrZingo@users.noreply.github.com>
Co-authored-by: DrZingo <DrZingo@users.noreply.github.com>
Fixes#378. The issue was that because indent style detection
ran before language detection, there was no language indent
style to fall back on if indent style detection failed, so it
would just default to 2 spaces.
* reverse the dependency between helix-tui and helix-view by moving a fiew types to view
* fix tests
* clippy and format fixes
Co-authored-by: Keith Simmons <keithsim@microsoft.com>
This commit adds six new commands to interact with system clipboard:
- clipboard-yank
- clipboard-yank-join
- clipboard-paste-after
- clipboard-paste-before
- clipboard-paste-replace
- show-clipboard-provider
System clipboard provider is detected by checking a few environment
variables and executables. Currently only built-in detection is
supported.
`clipboard-yank` will only yank the "main" selection, which is currently the first
one. This will need to be revisited later.
Closes https://github.com/helix-editor/helix/issues/76
* Fix expansion of `~`, dont use directory relative to cwd.
* Add `expand_tilde`
* Bring back `canonicalize_path`, use `expand_tilde` to `normalize`
* Make `:open ~` completion work
* Fix clippy
* Fold home dir into tilde in Document `realitve_path`
This is necessary to workaround ownership issues across function calls.
The issue notably arised when implementing the registers into `Editor`
and I was getting annoyed again when implementing copy/pasting into
system clipboard.
The problem is addressed by using macro calls instead of function calls.
There is no notable side effect.
* Add convenience/clarity wrapper for Range initialization
* Add keycode parse and display methods
* Add remapping functions and tests
* Implement key remapping
* Add remapping book entry
* Use raw string literal for toml
* Add command constants
* Make command functions private
* Map directly to commands
* Match key parsing/displaying to Kakoune
* Formatting pass
* Update documentation
* Formatting
* Fix example in the book
* Refactor into single config file
* Formatting
* Refactor configuration and add keymap newtype wrappers
* Address first batch of PR comments
* Replace FromStr with custom deserialize
Adds `ui.linenr.selected` which controls highlight of linu numbes which
have cursors on.
- Fallback to linenr if linenr.selected is missing
- Update docs and themes
- Add TODOs for themes with temporary linenr.selected
Registers are stored inside `Editor` and accessed without `RwLock`.
To work around ownership, I added a sister method to `Editor::current`:
`Editor::current_with_context`. I tried to modify `Editor::current`
directly but it's used at a lot of places so I reverted into this for
now at least.
- Move char functions into their own module under helix_core.
- Use matches!() macro where appropriate.
- Use a static lifetime on indent_unit() now that we can.
* add alternate file
inspired by vim ctrl-6/kak ga commands. the alternate file is kept per view
* apply feedback from #223
* rename to last_accessed
* add ga doc
* add fail message for ga
* Disable deleting from an empty buffer which can cause a crash.
* Improve on the fix for deleting from the end of the buffer.
* Clean up leftover log.
* Avoid theoretical underflow.
* Implement :before which accepts a time interval and moves the editor to
the closest history state to the commit of the current time minus that
interval. Current time is now by default, or the commit time if :before
has just been used.
* Add :earlier an :later commands that can move through
the edit history and retrieve changes hidded by undoing
and commiting new changes. The commands accept a number
of steps or a time period relative to the currrent change.
* Fix clippy lint error.
* Remove the dependency on parse_duration, add a custom parser instead.
* Fix clippy errors.
* Make helix_core::history a public module.
* Use the helper for getting the current document and view.
* Handled some PR comments.
* Fix the logic in :later n.
Co-authored-by: Ivan Tham <pickfire@riseup.net>
* Add an alias for :earlier.
Co-authored-by: Ivan Tham <pickfire@riseup.net>
* Add an alias for later.
Co-authored-by: Ivan Tham <pickfire@riseup.net>
* Run cargo fmt.
* Add some tests for earlier and later.
* Add more tests and restore the fix for later that diappeared somehow.
* Use ? instead of a match on an option.
Co-authored-by: Ivan Tham <pickfire@riseup.net>
* Rename to UndoKind.
* Remove the leftover match.
* Handle a bunch of review comments.
* More systemd.time compliant time units and additional description for the new commands.
* A more concise rewrite of the time span parser using ideas from PR discussion.
* Replace a match with map_err().
Co-authored-by: Ivan Tham <pickfire@riseup.net>
Co-authored-by: Jakub Bartodziej <jqb@google.com>
Co-authored-by: Ivan Tham <pickfire@riseup.net>
User can select register to yank into with the " command.
A new state is added to `Editor` and `commands::Context` structs.
This state is managed by leveraging a new struct `RegisterSelection`.
Can't do it via a scm query nicely because it returns an iterator over
all the matches, whereas we want to traverse the tree ourselves.
Can't extract the pattern data from a parsed query either.
Oh well, toml files for now.