This commit adds new functions to `Transaction` that allow creating
edits that might potentially overlap. Any change that overlaps
previous changes is ignored. Furthermore, a utility method is added
that also drops selections associated with dropped changes (for
transactions that are created from a selection).
This is needed to avoid crashes when applying multicursor
autocompletions, as the edit from a previous cursor may overlap
with the next cursor/edit.
* Fix#6092
Cause were some incorrect assumptions that missed an edge case in the
`Selection.contains()` calculation. Tests were added accordingly.
* Fix Selection.contains() edge-case handling.
Removing the len check short-circuit was the only thing needed as
pointed out by @dead10ck.
* use max_line_width + 1 during softwrap to account for newline char
Helix softwrap implementation always wraps lines so that the newline
character doesn't get cut off so he line wraps one chars earlier then
in other editors. This is necessary, because newline chars are always
selecatble in helix and must never be hidden.
However That means that `max_line_width` currently wraps one char
earlier than expected. The typical definition of line width does not
include the newline character and other helix commands like `:reflow`
also don't count the newline character here.
This commit makes softwrap use `max_line_width + 1` instead of
`max_line_width` to correct the impedance missmatch.
* fix typos
Co-authored-by: Jonathan Lebon <jonathan@jlebon.com>
* Add text-width to config.toml
* text-width: update setting documentation
* rename leftover config item
* remove leftover max-line-length occurrences
* Make `text-width` optional in editor config
When it was only used for `:reflow` it made sense to have a default
value set to `80`, but now that soft-wrapping uses this setting, keeping
a default set to `80` would make soft-wrapping behave more aggressively.
* Allow softwrapping to ignore `text-width`
Softwrapping wraps by default to the viewport width or a configured
`text-width` (whichever's smaller). In some cases we only want to set
`text-width` to use for hard-wrapping and let longer lines flow if they
have enough space. This setting allows that.
* Revert "Make `text-width` optional in editor config"
This reverts commit b247d526d6.
* soft-wrap: allow per-language overrides
* Update book/src/configuration.md
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
* Update book/src/languages.md
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
* Update book/src/configuration.md
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
---------
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
Co-authored-by: Jonathan Lebon <jonathan@jlebon.com>
Co-authored-by: Alex Boehm <alexb@ozrunways.com>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Doc string fix
Delete duplicate `the`
* selection.rs doc string wording
* Remove extra whitespace at end of doc text
---------
Co-authored-by: Ivan Tham <pickfire@riseup.net>
Open a new document `test.rs` and type the following:
`di//<esc><C-c>`
The margin calculation pushes the range out of bounds for the comment
marker when there are no characters (newline) after it.
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value:
Char range out of bounds: char range 0..3,
Rope/RopeSlice char length 2', ropey-1.6.0/src/rope.rs:546:37
The debug build catches the error in the transaction: thread 'main'
panicked at 'attempt to subtract with overflow',
helix-core/src/transaction.rs:503:26
* Make `m` textobject look for pairs enclosing selections
Right now, this textobject only looks for pairs that surround the
cursor. This ensures that the pair found encloses each selection, which
is likely to be intuitively what is expected of this textobject.
* Simplification of match code
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Adjust logic for ensuring surround range encloses selection
Prior, it was missing the case where the start of the selection came
before the opening brace. We also had an off-by-one error where if the
end of the selection was on the closing brace it would not work.
* Refactor to search for the open pair specifically to avoid edge cases
* Adjust wording of autoinfo to reflect new functionality
* Implement tests for surround functionality in new integration style
* Fix handling of skip values
* Fix out of bounds error
* Add `ma` version of tests
* Fix formatting of tests
* Reduce indentation levels for readability, and update comments
* Preserve each selection's direction with enclosing pair surround
* Add test case for multiple cursors resulting in overlap
* Mark known failures as TODO
* Make tests multi-threaded or they fail
* Cargo fmt
* Fix typos in integration test comments
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* properly handle LSP position encoding
* add debug assertion to Transaction::change
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
The loop always iterates the number of times the user specified even
if the beginning/end of the document is reached.
For an extreme demonstration try the following commands, Helix will
hang for several seconds.
100000000w
100000000]c
If the last argument to shellwords ends in a multibyte utf8 character
the entire argument will be dropped.
e.g. `:sh echo test1 test2𒀀` will only output `test1`
Add additional tests based on the code review feedback
The purpose of this change is to remove the mutable self borrow on
`HighlightIterLayer::sort_key` so that we can sort layers with the
correct ordering using the `Vec::sort` function family.
`HighlightIterLayer::sort_key` needs `&mut self` since it calls
`Peekable::peek` which needs `&mut self`. `Vec::sort` functions
only give immutable borrows of the elements to ensure the
correctness of the sort.
We could instead approach this by creating an eager Peekable and using
that instead of `std::iter::Peekable` to wrap `QueryCaptures`:
```rust
struct EagerPeekable<I: Iterator> {
iter: I,
peeked: Option<I::Item>,
}
impl<I: Iterator> EagerPeekable<I> {
fn new(mut iter: I) -> Self {
let peeked = iter.next();
Self { iter, peeked }
}
fn peek(&self) -> Option<&I::Item> {
self.peeked.as_ref()
}
}
impl<I: Iterator> Iterator for EagerPeekable<I> {
type Item = I::Item;
fn next(&mut self) -> Option<Self::Item> {
std::mem::replace(&mut self.peeked, self.iter.next())
}
}
```
This would be a cleaner approach (notice how `EagerPeekable::peek`
takes `&self` rather than `&mut self`), however this doesn't work in
practice because the Items emitted by the `tree_sitter::QueryCaptures`
Iterator must be consumed before the next Item is returned.
`Iterator::next` on `tree_sitter::QueryCaptures` modifies the
`QueryMatch` returned by the last call of `next`. This behavior is
not currently reflected in the lifetimes/structure of `QueryCaptures`.
This fixes an issue with layers being out of order when using combined
injections since the old code only checked the first range in the
layer. Layers being out of order could cause missing highlights for
combined-injections content.
* rework positioning/rendering, enables softwrap/virtual text
This commit is a large rework of the core text positioning and
rendering code in helix to remove the assumption that on-screen
columns/lines correspond to text columns/lines.
A generic `DocFormatter` is introduced that positions graphemes on
and is used both for rendering and for movements/scrolling.
Both virtual text support (inline, grapheme overlay and multi-line)
and a capable softwrap implementation is included.
fix picker highlight
cleanup doc formatter, use word bondaries for wrapping
make visual vertical movement a seperate commnad
estimate line gutter width to improve performance
cache cursor position
cleanup and optimize doc formatter
cleanup documentation
fix typos
Co-authored-by: Daniel Hines <d4hines@gmail.com>
update documentation
fix panic in last_visual_line funciton
improve soft-wrap documentation
add extend_visual_line_up/down commands
fix non-visual vertical movement
streamline virtual text highlighting, add softwrap indicator
fix cursor position if softwrap is disabled
improve documentation of text_annotations module
avoid crashes if view anchor is out of bounds
fix: consider horizontal offset when traslation char_idx -> vpos
improve default configuration
fix: mixed up horizontal and vertical offset
reset view position after config reload
apply suggestions from review
disabled softwrap for very small screens to avoid endless spin
fix wrap_indicator setting
fix bar cursor disappearring on the EOF character
add keybinding for linewise vertical movement
fix: inconsistent gutter highlights
improve virtual text API
make scope idx lookup more ergonomic
allow overlapping overlays
correctly track char_pos for virtual text
adjust configuration
deprecate old position fucntions
fix infinite loop in highlight lookup
fix gutter style
fix formatting
document max-line-width interaction with softwrap
change wrap-indicator example to use empty string
fix: rare panic when view is in invalid state (bis)
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* improve documentation for positoning functions
* simplify tests
* fix documentation of Grapheme::width
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* add explicit drop invocation
* Add explicit MoveFn type alias
* add docuntation to Editor::cursor_cache
* fix a few typos
* explain use of allow(deprecated)
* make gj and gk extend in select mode
* remove unneded debug and TODO
* mark tab_width_at #[inline]
* add fast-path to move_vertically_visual in case softwrap is disabled
* rename first_line to first_visual_line
* simplify duplicate if/else
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
increment/decrement (C-a/C-x) had some buggy behavior where selections
could be offset incorrectly or the editor could panic with some edits
that changed the number of characters in a number or date. These stemmed
from the automatic jumping behavior which attempted to find the next
date or integer to increment. The jumping behavior also complicated the
code quite a bit and made the behavior somewhat difficult to predict
when using many cursors.
This change removes the automatic jumping behavior and only increments
or decrements when the full text in a range of a selection is a number
or date. This simplifies the code and fixes the panics and buggy
behaviors from changing the number of characters.
* Add a undo/redo split test case for crossing branches
* history: Switch up/down transaction chaining order
The old code tends to work in practice because, usually, either up_txns
or down_txns are empty. When both have contents though, we can run into
a panic trying to compose them all since they will disagree on the
length of the text. This fixes the panic test case in the parent
commit.
* Show (git) diff signs in gutter (#3890)
Avoid string allocation when git diffing
Incrementally diff using changesets
refactor diffs to be provider indepndent and improve git implementation
remove dependency on zlib-ng
switch to asynchronus diffing with similar
Update helix-vcs/Cargo.toml
fix toml formatting
Co-authored-by: Ivan Tham <pickfire@riseup.net>
fix typo in documentation
use ropey reexpors from helix-core
fix crash when creating new file
remove useless use if io::Cursor
fix spelling mistakes
implement suggested improvement to repository loading
improve git test isolation
remove lefover comments
Co-authored-by: univerz <univerz@fu-solution.com>
fixed spelling mistake
minor cosmetic changes
fix: set self.differ to None if decoding the diff_base fails
fixup formatting
Co-authored-by: Ivan Tham <pickfire@riseup.net>
reload diff_base when file is reloaded from disk
switch to imara-diff
Fixup formatting
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Redraw buffer whenever a diff is updated.
Only store hunks instead of changes for individual lines to easily allow
jumping between them
Update to latest gitoxide version
Change default diff gutter position
Only update gutter after timeout
* update diff gutter synchronously, with a timeout
* Apply suggestions from code review
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* address review comments and ensure lock is always aquired
* remove configuration for redraw timeout
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
The 'revisions' field on History can't be treated as linear: each
Revision in the revisions Vec has a parent link and an optional child
link. We can follow those to unroll the recent history.
When using undo/redo, the history revision can be decremented. In that
case we should apply the inversions since the given revision in
History::changes_since. This prevents panics with jumplist operations
when a session uses undo/redo to move the jumplist selection outside
of the document.
* Add a test case for updating jumplists across windows
* Apply transactions to all views on history changes
This ensures that jumplist selections follow changes in documents, even
when there are multiple views (for example a split where both windows
edit the same document).
* Leave TODOs for cleaning up View::apply
* Use Iterator::reduce to compose history transactions
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* significantly improve treesitter performance while editing large files
* Apply stylistic suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* use PartialEq and Hash instead of a freestanding function
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
The current `:tree-sitter-subtree` has a bug for field-names when the
field name belongs to an unnamed child node. Take this ruby example:
def self.method_name
true
end
The subtree given by tree-sitter-cli is:
(singleton_method [2, 0] - [4, 3]
object: (self [2, 4] - [2, 8])
name: (identifier [2, 9] - [2, 20])
body: (body_statement [3, 2] - [3, 6]
(true [3, 2] - [3, 6])))
But the `:tree-sitter-subtree` output was
(singleton_method
object: (self)
body: (identifier)
(body_statement (true)))
The `singleton_method` rule defines the `name` and `body` fields in an
unnamed helper rule `_method_rest` and the old implementation of
`pretty_print_tree_impl` would pass the `field_name` down from the
named `singleton_method` node.
To fix it we switch to the [TreeCursor] API which is recommended by
the tree-sitter docs for traversing the tree. `TreeCursor::field_name`
accurately determines the field name for the current cursor position
even when the node is unnamed.
[TreeCursor]: https://docs.rs/tree-sitter/0.20.9/tree_sitter/struct.TreeCursor.html
This fixes an edge case for completing shellwords. With a file
"a b.txt" in the current directory, the sequence `:open a\<tab>`
will result in the prompt containing `:open aa\ b.txt`. This is
because the length of the input which is trimmed when replacing with
completion is calculated on the part of the input which is parsed by
shellwords and then escaped (in a separate operation), which is lossy.
In this case it loses the trailing backslash.
The fix provided here refactors shellwords to track both the _words_
(shellwords with quotes and escapes resolved) and the _parts_ (chunks
of the input which turned into each word, with separating whitespace
removed). When calculating how much of the input to delete when
replacing with the completion item, we now use the length of the last
part.
This also allows us to eliminate the duplicate work done in the
`ends_with_whitespace` check.
* add tree sitter match limit to avoid slowdowns for larger files
Affects all tree sitter queries and should speedup both
syntax highlighting and text object queries.
This has been shown to fix significant slowdowns with textobjects
for rust files as small as 3k loc.
* Apply suggestions from code review
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
`deepest_preceding` is known to be a descendant of `node`. Repeated
calls of `Node::parent` _should_ eventually turn `deepest_preceding`
into `node`, but when the node is errored (the tree contains a syntax
error), `Node::parent` returns None.
In the typescript case:
if(true) &&true
// ^ press enter here
The tree is:
(program [0, 0] - [1, 0]
(if_statement [0, 0] - [0, 15]
condition: (parenthesized_expression [0, 2] - [0, 8]
(true [0, 3] - [0, 7]))
consequence: (expression_statement [0, 8] - [0, 15]
(binary_expression [0, 8] - [0, 15]
left: (identifier [0, 8] - [0, 8])
right: (true [0, 11] - [0, 15])))))
`node` is the `program` node and `deepest_preceding` is the
`binary_expression`. The tree is errored on the `binary_expression`
node with `(MISSING identifier [0, 8] - [0, 8])`.
In the C++ case:
; <<
// press enter after the ';'
The tree is:
(translation_unit [0, 0] - [1, 0]
(expression_statement [0, 0] - [0, 1])
(ERROR [0, 1] - [0, 4]
(identifier [0, 1] - [0, 1])))
`node` is the `translation_unit` and `deepest_preceding` is the `ERROR`
node.
In both cases, `Node::parent` on the errored node returns None.
This changes the completion items to be rendered with shellword
escaping, so a file `a b.txt` is rendered as `a\ b.txt` which matches
how it should be inputted.
8584b38cfb switched to shellwords for
completion in command-mode. This changes the conditions for choosing
whether to complete the command or use the command's completer.
This change processes the input as shellwords up-front and uses
shellword logic about whitespace to determine whether the command
or argument should be completed.
The change in d801a6693c to search for
suffixes in `file-types` is too permissive: files like the tutor or
`*.txt` files are now mistakenly interpreted as R or perl,
respectively.
This change changes the syntax for specifying a file-types entry that
matches by suffix:
```toml
file-types = [{ suffix = ".git/config" }]
```
And changes the file-type detection to first search for any non-suffix
patterns and then search for suffixes only with the file-types entries
marked explicitly as suffixes.
Just like for grammars we currently force a lower-case of the name for
some actions (like filesystem lookup). To make this consistent and less
surprising for users, we remove this lower-casing here.
Note: it is still the preferred way to name both language and grammar in
lower-case
Signed-off-by: Christian Speich <cspeich@emlix.com>
Pascal Kuthe
gibbz00
Kyle Smith
Clément Delafargue
Urgau
Alexandr
Triton171
Mike Trinkala
Daniel S Poulin
Michael Davis
greg-enbala
DylanBulfin
TotalKrill
sigmaSd
Kirawi
dxtr85
ath3
Blaž Hrastnik
Jonathan LEI
Poliorcetics
Armin Ronacher
Christian Speich