Here we add syntax to the languages.toml languge
[[grammar]]
name = "<name>"
source = { .. }
Which can be used to specify a tree-sitter grammar separately of
the language that defines it, and we make this distinction for
two reasons:
* In later commits, we will separate this code from helix-core
and bring it to a new helix-loader crate. Using separate schemas
for language and grammar configurations allows for a nice divide
between the types needed to be declared in helix-loader and in
helix-core/syntax
* Two different languages may use the same grammar. This is currently
the case with llvm-mir-yaml and yaml. We could accomplish a config
that works for this with just `[[languages]]`, but it gets a bit
dicey with languages depending on one another. If you enable
llvm-mir-yaml and disable yaml, does helix still need to fetch and
build tree-sitter-yaml? It could be a matter of interpretation.
* Move runtime file location definitions to core
* Add basic --health command
* Add language specific --health
* Show summary for all langs with bare --health
* Use TsFeature from xtask for --health
* cargo fmt
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Treesitter captures can contain multiple nodes like so:
```
(line_comment)+ @comment
```
This would match each line in a comment as a separate
`@comment` capture when what we actually want is the
whole set of contiguous `line_comment` nodes to be
captured under the `@comment` capture. This commit enables
this behaviour.
* impl auto pairs config
Implements configuration for which pairs of tokens get auto completed.
In order to help with this, the logic for when *not* to auto complete
has been generalized from a specific hardcoded list of characters to
simply testing if the next/prev char is alphanumeric.
It is possible to configure a global list of pairs as well as at the
language level. The language config will take precedence over the
global config.
* rename AutoPair -> Pair
* clean up insert_char command
* remove Rc
* remove some explicit cloning with another impl
* fix lint
* review comments
* global auto-pairs = false takes precedence over language settings
* make clippy happy
* print out editor config on startup
* move auto pairs accessor into Document
* rearrange auto pair doc comment
* use pattern in Froms
This code:
let start = ensure_grapheme_boundary_next(text, text.byte_to_char(start));
let end = ensure_grapheme_boundary_next(text, text.byte_to_char(end));
Would convert byte to char index, but then internally immediately convert back
to byte index, operate on it, then convert it to char index.
This change reduces the amount of time spent in ensure_grapheme_boundary from
29% to 2%.
* add select_next_sibling and select_prev_sibling commands
* refactor objects to use higher order functions
* address clippy feedback
* move selection cloning into commands
* add default keybindings under left/right brackets
* use [+t,]+t for selecting sibling syntax nodes
* setup Alt-{j,k,h,l} default keymaps for syntax selection commands
* reduce boilerplate of select_next/prev_sibling in commands
* import tree-sitter Node type in commands
Auto pairs were resulting in incorrect ranges in the resulting when the
line terminators are CRLF (i.e. Windows). It turns out this is because
when we were checking if the selection was a single-width cursor, it
incorrectly assumed that this would be a single char. This is not the
case, as a cursor can cover a multi-code point grapheme. Therefore,
we must instead explicitly work with and check graphemes to determine
if the cursor should move or extend the selection.
Fixes#1436
* feat(commands): shrink_selection
Add `shrink_selection` command that can be used to shrink
previously expanded selection.
To make `shrink_selection` work it was necessary to add
selection history to the Document since we want to shrink
the selection towards the syntax tree node that was initially
selected.
Selection history is cleared any time the user changes
selection other way than by `expand_selection`. This ensures
that we don't get some funky edge cases when user calls
`shrink_selection`.
Related: https://github.com/helix-editor/helix/discussions/1328
* Refactor shrink_selection, move history to view
* Remove useless comment
* Add default key mapping for extend&shrink selection
* Rework contains_selection method
* Shrink selection without expand selects first child
* Add injection regex for more languages
To support embedding them in other languages like markdown.
* Add llvm-mir highlighting
LLVM Machine IR is dumped as yaml files that can embed LLVM IR and
Machine IR.
To support this, add a llvm-mir-yaml language that uses the yaml
parser, but uses different injections to highlight IR and MIR.
* Update submodule with fixed multiline comments
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* feat(commands): ensure_selections_forward
Add command that ensures that selections are in forward direction.
Fixes: https://github.com/helix-editor/helix/issues/1332
* Add keybinding for ensure_selections_forward
Add `A-:` keybinding for the ensure_selections_forward command.
* Re-use range.flip for flip_selections command
* feat(ui): file encoding in statusline
Display file encoding in statusline if the encoding
isn't UTF-8.
* Re-export encoding_rs from core
From there it can be imported by other mods
that rely on it.
* feat(lsp): configurable diagnostic severity
Allow severity of diagnostic messages to be configured.
E.g. allow turning of Hint level diagnostics.
Fixes: https://github.com/helix-editor/helix/issues/1007
* Use language_config() method
* Add documentation for diagnostic_severity
* Use unreachable for unknown severity level
* fix: documentation for diagnostic_severity config
* use auto pairs with selections
Previously, the auto pairs code was converting the user selection into
its cursor form, and setting the transaction's selection to that cursor.
This has the effect of destroying the user's selection if they type a
pair character that gets auto completed.
This fixes the code to work with the user's selection, inserting auto
pairs where appropriate, but either keeping or extending the user's
selection.
* use movement::Direction instead of bool
* assume 0-width cursor is forward
* Add auto pairs for same-char pairs
* Add unit tests for all existing functionality
* Add auto pairs for same-char pairs (quotes, etc). Account for
apostrophe in prose by requiring both sides of the cursor to be
non-pair chars or whitespace. This also incidentally will work for
avoiding a double single quote in lifetime annotations, at least until
<> is added
* Slight factor of moving the cursor transform of the selection to
inside the hooks. This will enable doing auto pairing with selections,
and fixing the bug where auto pairs destroy the selection.
Fixes#1014
Fixes#1077. This was caused by the assumption that a block
cursor is represented as zero width internally and simply
rendered to be a single width selection, where as in reality
a block cursor is an actual single width selection in form and
function.
Behavioural changes:
1. Surround selection no longer works when cursor is _on_ a
surround character that has matching pairs (like `'`
or `"`). This was the intended behaviour from the start
but worked till now because of the cursor position
calculation mismatch.
* Jump to end char of surrounding pair from any cursor pos
* Separate bracket matching into exact and fuzzy search
* Add constants for bracket chars
* Abort early if char under cursor is not a bracket
* Simplify bracket char validation
* Refactor node search and unify find methods
* Remove bracket constants
* Add command to inc/dec number under cursor
With the cursor over a number in normal mode, Ctrl + A will increment the
number and Ctrl + X will decrement the number. It works with binary, octal,
decimal, and hexidecimal numbers. Here are some examples.
0b01110100
0o1734
-24234
0x1F245
If the number isn't over a number it will try to find a number after the
cursor on the same line.
* Move several functions to helix-core
* Change to work based on word under selection
* It no longer finds the next number if the cursor isn't already over
a number.
* It only matches numbers that are part of words with other characters
like "foo123bar".
* It now works with multiple selections.
* Add some unit tests
* Fix for clippy
* Simplify some things
* Keep previous selection after incrementing
* Use short word instead of long word
This change requires us to manually handle minus sign.
* Don't pad decimal numbers if no leading zeros
* Handle numbers with `_` separators
* Refactor and add tests
* Move most of the code into core
* Add tests for the incremented output
* Use correct range
* Formatting
* Rename increment functions
* Make docs more specific
* This is easier to read
* This is clearer
* Type can be inferred
Michael Davis
Gokul Soumya
dependabot[bot]
Blaž Hrastnik
Skyler Hawthorne
Ivan Tham
Omnikar
Kevin Sjöberg
Kirawi
Matouš Dzivjak
Sebastian Neubauer
Triton171
Alexis Mousset
Stuart Hinson
ath3
Jason Rodney Hansen
George Rodrigues
Martin Junghanns