Completion requests are computed asynchronously to avoid common micro
freezes while editing. This means that once a completion request
completes, the state of the editor might have changed. Currently,
there is a check to ensure we are still in insert mode. However,
we also need to ensure that the view and document hasn't changed
to avoid accidentally using a savepoint with the wrong view/document.
Furthermore, the editor might request a new completion while the
previous completion request hasn't complemented yet. This can
lead to weird flickering or an outdated completion request replacing
a newer completion that has already completed (the LSP server
is not required to process completion requests in order). This change
also needed to ensure determinism/linear ordering so that completion
popup always correspond to the last completion request.
Fixing autocomplete required moving the document savepoint before the
asynchronous completion request. However, this in turn causes new bugs:
If the completion popup is open, the savepoint is restored when the
popup closes (or another entry is selected). However, at that point
a new completion request might already have been created which
would have replaced the new savepoint (therefore leading to incorrectly
applied complies).
This commit fixes that bug by allowing in arbitrary number of
savepoints to be tracked on the document. The savepoints are reference
counted and therefore remain valid as long as any reference to them
remains. Weak reference are stored on the document and any reference
that can not be upgraded anymore (hence no strong reference remain)
are automatically discarded.
Currently, the selection is not saved/restored when completion
checkpoints are applied. This is usually fine because undoing changes
usually restores maps selections back in insert mode. But this is not
always the case and especially problematic in the presence of
multi-cursor completions (since completions are applied relative to
the selection/cursor) and snippets (which can change the selection)
* Do not add intermediate lines to jumplist with :<linenum> command.
* Revert jumplist index changes.
* Reduce calculations during update cycle.
* Use jumplist for undo, set jumplist before preview.
* remove some debug logging
* Revert "remove some debug logging"
This reverts commit 5772c4327e.
* Revert "Use jumplist for undo, set jumplist before preview."
This reverts commit f73a1b2982.
* Add last_selection, update implementation.
* @pascalkuthe initial feedback
* Ensure ":goto 123" keybinding works as expected.
* fix clippies, prefer expect() for expect last_selection state
Add a restart debug session command, which would issue a
[Restart Request][1], if the debugger supports it and a session is
running. It uses the same arguments and requests used to start the
initial session, when recreating it.
It builds upon #5532, making use of the changes to the termination
workflow of a session.
[1]: https://microsoft.github.io/debug-adapter-protocol/specification#Requests_RestartCloses: #5594
Signed-off-by: Filip Dutescu <filip.dutescu@gmail.com>
* Make `m` textobject look for pairs enclosing selections
Right now, this textobject only looks for pairs that surround the
cursor. This ensures that the pair found encloses each selection, which
is likely to be intuitively what is expected of this textobject.
* Simplification of match code
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Adjust logic for ensuring surround range encloses selection
Prior, it was missing the case where the start of the selection came
before the opening brace. We also had an off-by-one error where if the
end of the selection was on the closing brace it would not work.
* Refactor to search for the open pair specifically to avoid edge cases
* Adjust wording of autoinfo to reflect new functionality
* Implement tests for surround functionality in new integration style
* Fix handling of skip values
* Fix out of bounds error
* Add `ma` version of tests
* Fix formatting of tests
* Reduce indentation levels for readability, and update comments
* Preserve each selection's direction with enclosing pair surround
* Add test case for multiple cursors resulting in overlap
* Mark known failures as TODO
* Make tests multi-threaded or they fail
* Cargo fmt
* Fix typos in integration test comments
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
Example:
```
test
testitem
```
Select line 2 with x, then type Alt-C; Helix will go into an infinite
loop. The saturating_sub keeps the head_row and anchor_row pinned at 0,
and a selection is never made since the first line is too short.
This matches the behavior from 42ad1a9e04
but for the first and last change. The selection rules are the same
as for goto_next/prev_change: additions and modifications select the
added and modified range while deletions are represented with a point.
* hide duplicate symlinks from the picker
* Apply suggestions from code review
Co-authored-by: g-re-g <123515925+g-re-g@users.noreply.github.com>
* minor stylistic fix
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
---------
Co-authored-by: g-re-g <123515925+g-re-g@users.noreply.github.com>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
This change makes `ms<ret>` work similarly to `t<ret>` and related
find commands: when the next event is a keypress of Enter, surround
the selection with the document's line-endings.
* rework positioning/rendering, enables softwrap/virtual text
This commit is a large rework of the core text positioning and
rendering code in helix to remove the assumption that on-screen
columns/lines correspond to text columns/lines.
A generic `DocFormatter` is introduced that positions graphemes on
and is used both for rendering and for movements/scrolling.
Both virtual text support (inline, grapheme overlay and multi-line)
and a capable softwrap implementation is included.
fix picker highlight
cleanup doc formatter, use word bondaries for wrapping
make visual vertical movement a seperate commnad
estimate line gutter width to improve performance
cache cursor position
cleanup and optimize doc formatter
cleanup documentation
fix typos
Co-authored-by: Daniel Hines <d4hines@gmail.com>
update documentation
fix panic in last_visual_line funciton
improve soft-wrap documentation
add extend_visual_line_up/down commands
fix non-visual vertical movement
streamline virtual text highlighting, add softwrap indicator
fix cursor position if softwrap is disabled
improve documentation of text_annotations module
avoid crashes if view anchor is out of bounds
fix: consider horizontal offset when traslation char_idx -> vpos
improve default configuration
fix: mixed up horizontal and vertical offset
reset view position after config reload
apply suggestions from review
disabled softwrap for very small screens to avoid endless spin
fix wrap_indicator setting
fix bar cursor disappearring on the EOF character
add keybinding for linewise vertical movement
fix: inconsistent gutter highlights
improve virtual text API
make scope idx lookup more ergonomic
allow overlapping overlays
correctly track char_pos for virtual text
adjust configuration
deprecate old position fucntions
fix infinite loop in highlight lookup
fix gutter style
fix formatting
document max-line-width interaction with softwrap
change wrap-indicator example to use empty string
fix: rare panic when view is in invalid state (bis)
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* improve documentation for positoning functions
* simplify tests
* fix documentation of Grapheme::width
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* add explicit drop invocation
* Add explicit MoveFn type alias
* add docuntation to Editor::cursor_cache
* fix a few typos
* explain use of allow(deprecated)
* make gj and gk extend in select mode
* remove unneded debug and TODO
* mark tab_width_at #[inline]
* add fast-path to move_vertically_visual in case softwrap is disabled
* rename first_line to first_visual_line
* simplify duplicate if/else
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
increment/decrement (C-a/C-x) had some buggy behavior where selections
could be offset incorrectly or the editor could panic with some edits
that changed the number of characters in a number or date. These stemmed
from the automatic jumping behavior which attempted to find the next
date or integer to increment. The jumping behavior also complicated the
code quite a bit and made the behavior somewhat difficult to predict
when using many cursors.
This change removes the automatic jumping behavior and only increments
or decrements when the full text in a range of a selection is a number
or date. This simplifies the code and fixes the panics and buggy
behaviors from changing the number of characters.
This roughly matches the behavior of the diagnostic picker: when
jumping to a diagnostic with `[d`/`]d`/`[D`/`]D`, the range of the
diagnostic is selected instead of the start point.
* Reset mode when changing buffers
This is similar to the change in
e4c9d4082a139aac3aea4506918171b96e81f5b9: reset the editor to normal
mode when changing buffers. Usually the editor is already in normal
mode but it's possible to setup insert-mode keybindings that change
buffers.
* Move normal mode entering code to Editor
This should be called internally in the Editor when changing documents
(Editor::switch) or changing focuses (Editor::focus).
* add command and keybding to jump to next/prev hunk
* add textobject for change
* Update helix-vcs/src/diff.rs
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* select entire hunk instead of first char
* fix selection range
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Add `View::ensure_cursor_in_view_center` to adjust view after searching and jumping
Also `offset_coodrs_to_in_view` was refactored to reduce duplicated position calculations.
* Fix a wrong offset calculation in `offset_coords_to_in_view_center`
It ignored `scrolloff` if `centering` is false.
* Change default TS object bindings
Changes 'match inside/around' bindings for:
- type definition from `c` to `t`
- comments from `o` to `c`
- tests from `t` to `T`
Also changes those for the `]` / `[` bindings.
* Update docs for changed keybinds
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
This matches the insert-mode behavior for Vim and Kakoune: if the
current line is empty except for whitespace, `<ret>` should insert a
line ending at the beginning of the line, moving any indentation to the
next line.
Language Servers may signal that they do not support a method in
the initialization result (server capabilities). We can check these
when making LSP requests and hint in the status line when a method
is not supported by the server. This can also prevent crashes in
servers which assume that clients do not send requests for methods
which are disabled in the server capabilities.
There is an existing pattern the LSP client module where a method
returns `Option<impl Future<Output = Result<_>>>` with `None` signaling
no support in the server. This change extends this pattern to the rest
of the client functions. And we log an error to the statusline for
manually triggered LSP calls which return `None`.
Pascal Kuthe
Kyle Smith
Filip Dutescu
Santiago Vrancovich
Triton171
Daniel S Poulin
lesleyrs
Mike Trinkala
Michael Davis
Filipe Azevedo
Gokul Soumya
Ole Krüger
ds-cbo
Ivan Tham
mejo13
Nikodem Rabuliński
greg-enbala
Gabriel Dinner-David
DylanBulfin
Sebastian Zivota
Jummit
Narazaki Shuji
nosa
Tshepang Mbambo
Jonathan LEI
Bob