Check if the stack frames contain the thread id and the frame before
trying to get the frame id. If case any of the two fails to be
found, provide the user with messages to inform them of the issue and
gracefully return.
Closes: #5625
Signed-off-by: Filip Dutescu <filip.dutescu@gmail.com>
Send a `Disconnect` DAP request if the `Terminated` event is received.
According to the specification, if the debugging session was started by
as `launch`, the debuggee should be terminated alongside the session. If
instead the session was started as `attach`, it should not be disposed of.
This default behaviour can be overriden if the `supportTerminateDebuggee`
capability is supported by the adapter, through the `Disconnect` request
`terminateDebuggee` argument, as described in
[the specification][discon-spec].
This also implies saving the starting command for a debug sessions, in
order to decide which behaviour should be used, as well as validating the
capabilities of the adapter, in order to decide what the disconnect should
do.
An additional change made is handling of the `Exited` event, showing a
message if the exit code is different than `0`, for the user to be aware
off the termination failure.
[discon-spec]: https://microsoft.github.io/debug-adapter-protocol/specification#Requests_DisconnectCloses: #4674
Signed-off-by: Filip Dutescu <filip.dutescu@gmail.com>
The completion component has a separate branch for handling the
Escape key but it can use the `ignore_escape_key` helper added for
signature-help instead.
This should not cause a behavior change - it's just cleaning up the
completion component.
* feat(ui): deprecated completions
Mark deprecated completions using strike-through
(CROSSED_OUT modifier). The deprection information
is taken either from the `deprecated` field of the
completion item or from the completion tags.
The field seems to be the older way of passing
the deprecated information and it was already
marked as deprecated for Symbol. In completion
item the field is still valid but it seems that
the LSP is moving in the general direction of using
tags for this kind of information and as such
relying on tags as well seems reasonable and
future-proof.
So far LSP always required that `PositionEncoding.characters` is an
UTF-16 offset. Now that LSP 3.17 is available in `lsp-types` request
the server to send char offsets (UTF-32) or byte offsets (UTF-8)
instead. For compatability with old servers, UTF-16 remains as the
fallback as required by the standard.
* Make `m` textobject look for pairs enclosing selections
Right now, this textobject only looks for pairs that surround the
cursor. This ensures that the pair found encloses each selection, which
is likely to be intuitively what is expected of this textobject.
* Simplification of match code
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Adjust logic for ensuring surround range encloses selection
Prior, it was missing the case where the start of the selection came
before the opening brace. We also had an off-by-one error where if the
end of the selection was on the closing brace it would not work.
* Refactor to search for the open pair specifically to avoid edge cases
* Adjust wording of autoinfo to reflect new functionality
* Implement tests for surround functionality in new integration style
* Fix handling of skip values
* Fix out of bounds error
* Add `ma` version of tests
* Fix formatting of tests
* Reduce indentation levels for readability, and update comments
* Preserve each selection's direction with enclosing pair surround
* Add test case for multiple cursors resulting in overlap
* Mark known failures as TODO
* Make tests multi-threaded or they fail
* Cargo fmt
* Fix typos in integration test comments
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
Example:
```
test
testitem
```
Select line 2 with x, then type Alt-C; Helix will go into an infinite
loop. The saturating_sub keeps the head_row and anchor_row pinned at 0,
and a selection is never made since the first line is too short.
`:write` and other file-saving commands now check the file modification
time before writing to protect against overwriting external changes.
Co-authored-by: Gustavo Noronha Silva <gustavo@noronha.dev.br>
Co-authored-by: LeoniePhiline <22329650+LeoniePhiline@users.noreply.github.com>
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
This matches the behavior from 42ad1a9e04
but for the first and last change. The selection rules are the same
as for goto_next/prev_change: additions and modifications select the
added and modified range while deletions are represented with a point.
This will allow testing more of the code base, as well as enable UI-
specific testing.
Debug mode builds are prohibitively slow for the tests, mostly
because of the concurrency write tests. So there is now a profile for
integration tests that sets the optimization level to 2 for a few helix
crates, and lowers the number of rounds of concurrent writes to 1000.
* hide duplicate symlinks from the picker
* Apply suggestions from code review
Co-authored-by: g-re-g <123515925+g-re-g@users.noreply.github.com>
* minor stylistic fix
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
---------
Co-authored-by: g-re-g <123515925+g-re-g@users.noreply.github.com>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
This change makes `ms<ret>` work similarly to `t<ret>` and related
find commands: when the next event is a keypress of Enter, surround
the selection with the document's line-endings.
* rework positioning/rendering, enables softwrap/virtual text
This commit is a large rework of the core text positioning and
rendering code in helix to remove the assumption that on-screen
columns/lines correspond to text columns/lines.
A generic `DocFormatter` is introduced that positions graphemes on
and is used both for rendering and for movements/scrolling.
Both virtual text support (inline, grapheme overlay and multi-line)
and a capable softwrap implementation is included.
fix picker highlight
cleanup doc formatter, use word bondaries for wrapping
make visual vertical movement a seperate commnad
estimate line gutter width to improve performance
cache cursor position
cleanup and optimize doc formatter
cleanup documentation
fix typos
Co-authored-by: Daniel Hines <d4hines@gmail.com>
update documentation
fix panic in last_visual_line funciton
improve soft-wrap documentation
add extend_visual_line_up/down commands
fix non-visual vertical movement
streamline virtual text highlighting, add softwrap indicator
fix cursor position if softwrap is disabled
improve documentation of text_annotations module
avoid crashes if view anchor is out of bounds
fix: consider horizontal offset when traslation char_idx -> vpos
improve default configuration
fix: mixed up horizontal and vertical offset
reset view position after config reload
apply suggestions from review
disabled softwrap for very small screens to avoid endless spin
fix wrap_indicator setting
fix bar cursor disappearring on the EOF character
add keybinding for linewise vertical movement
fix: inconsistent gutter highlights
improve virtual text API
make scope idx lookup more ergonomic
allow overlapping overlays
correctly track char_pos for virtual text
adjust configuration
deprecate old position fucntions
fix infinite loop in highlight lookup
fix gutter style
fix formatting
document max-line-width interaction with softwrap
change wrap-indicator example to use empty string
fix: rare panic when view is in invalid state (bis)
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* improve documentation for positoning functions
* simplify tests
* fix documentation of Grapheme::width
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* add explicit drop invocation
* Add explicit MoveFn type alias
* add docuntation to Editor::cursor_cache
* fix a few typos
* explain use of allow(deprecated)
* make gj and gk extend in select mode
* remove unneded debug and TODO
* mark tab_width_at #[inline]
* add fast-path to move_vertically_visual in case softwrap is disabled
* rename first_line to first_visual_line
* simplify duplicate if/else
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
The new version of the `toml` crate is based on `toml_edit` and does
not support zero copy deserialization anymore. So we need to deserialize
`String` instead of `&str` in the keympa
Michael Davis
dependabot[bot]
Yusuf Bera Ertan
Filip Dutescu
Guillaume
Triton171
Erasin
Jonathan LEI
Pascal Kuthe
Matouš Dzivjak
A-Walrus
Gokul Soumya
Daniel S Poulin
lesleyrs
Colton Clemmer
Mike Trinkala
Blaž Hrastnik
Clément Delafargue
Skyler Hawthorne
William Etheredge
Filipe Azevedo
Dylan Bulfin
Ole Krüger
alice
Miguel Madrid-Mencía
ds-cbo