Commit Graph

1780 Commits (6cafd81e41f353a7005eef4248a09a2b1849bc5c)

Author SHA1 Message Date
Michael Davis 140df92d79 Fix command-mode completion behavior when input is escaped
If `a\ b.txt` were a local file, `:o a\ <tab>` would fill the prompt
with `:o aa\ b.txt` because the replacement range was calculated using
the shellwords-parsed part. Escaping the part before calculating its
length fixes this edge-case.
2 years ago
Michael Davis 3d283b2ca4 Escape filenames in command completion
This changes the completion items to be rendered with shellword
escaping, so a file `a b.txt` is rendered as `a\ b.txt` which matches
how it should be inputted.
2 years ago
Michael Davis 1536a65289 Fix whitespace handling in command-mode completion
8584b38cfb switched to shellwords for
completion in command-mode. This changes the conditions for choosing
whether to complete the command or use the command's completer.

This change processes the input as shellwords up-front and uses
shellword logic about whitespace to determine whether the command
or argument should be completed.
2 years ago
Michael Davis 48a3965ab4
Fix range offsets in multi-selection paste (#4608)
* Fix range offsets in multi-selection paste

d6323b7cbc introduced a regression with
multi-selection paste where pasting would not adjust the ranges
correctly. To fix it, we need to track the total number of characters
inserted in each changed selection and use that offset to slide each
new range forwards.

* Inherit selection directions on paste

* Add an integration-test for multi-selection pasting
2 years ago
Michael Davis 3814987298
Fix panic on paste from blackhole register (#4497)
The sequence "_y"_p panics because the blackhole register contains an
empty values vec. This causes a panic when pasting since it unwraps
a `slice::last`.
2 years ago
Michael Davis d6323b7cbc
Select text inserted by shell or paste (#4458)
This follows changes in Kakoune to the same effects:

* p/<space>p: 266d1c37d0
* !/<A-!>: 85b78dda2e

Selecting the new data inserted by shell or pasting is often more
useful than retaining a selection of the pre-paste/insert content.
2 years ago
Blaž Hrastnik c2c1280f02
Resolve a bunch of upcoming clippy lints 2 years ago
Michael Davis ba394dca6d
Fix panic from two windows editing the same document (#4570)
* Clamp highlighting range to be within document

This fixes a panic possible when two vsplits of the same document
exist and enough lines are deleted from the document so that one of
the windows focuses past the end of the document.

* Ensure cursor is in view on window change

If two windows are editing the same document, one may delete enough of
the document so that the other window is pointing at a blank page (past
the document end). In this change we ensure that the cursor is within
view whenever we switch to a new window (for example with `<C-w>w`).

* Update helix-term/src/ui/editor.rs

Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>

Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
2 years ago
Jonathan LEI db3383c76e
Exit select mode on replace commands (#4554) 2 years ago
Yuriy Gabuev c803ef8753
Fix `delete_char_backward` for paired characters (#4558)
When backward-deleting a character, if this character and the following
character form a Pair, we want to delete both. However, there is a bug
that deletes both characters also if both characters are closers of some
Pair.

This commit fixes that by adding an additional check that the deleted
character should be an opener in a Pair.

Closes https://github.com/helix-editor/helix/issues/4544.
2 years ago
Armin Ronacher 8584b38cfb
Correctly handle escaping in completion (#4316)
* Correctly handle escaping in completion

* Added escaping tests
2 years ago
dependabot[bot] e5319ea8c5
build(deps): bump once_cell from 1.15.0 to 1.16.0 (#4548)
Bumps [once_cell](https://github.com/matklad/once_cell) from 1.15.0 to 1.16.0.
- [Release notes](https://github.com/matklad/once_cell/releases)
- [Changelog](https://github.com/matklad/once_cell/blob/master/CHANGELOG.md)
- [Commits](https://github.com/matklad/once_cell/compare/v1.15.0...v1.16.0)

---
updated-dependencies:
- dependency-name: once_cell
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2 years ago
Matthew Toohey 00cf12f571
fix: make `scroll` aware of tabs and wide characters (#4519) 2 years ago
Matthias Deiml 5e256e4a98
Make shell_impl concurrent (#3180) 2 years ago
Poliorcetics c58e1729ce
fix: Never create automatic doc popups outside of Insert mode (#4456) 2 years ago
Michael Davis cefdface3b
Include colons for typable commands in command palette (#4495)
Before:

    Goto next buffer. [buffer-next]

After:

    Goto next buffer. [:buffer-next]
2 years ago
Dario Oddenino 6752c7d347
Trim quotes and braces from paths in goto_file_impl (#4370)
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
2 years ago
lazytanuki b4a3dd8f89
feat(lsp): LSP preselected items appear first in completion menu (#4480)
* feat(lsp): LSP preselected items appear first in completion menu

* fix: shorter diff
2 years ago
James O. D. Hunt ac0fe29867
commands: Make no arg ':theme' show name (#3740)
Most commands that accept an argument show their current value if no
argument is specified. The `:theme` command previously displayed an
error message in the status bar if not provided with an argument:

```
Theme name not provided
```

It now shows the current theme name in the status bar if no argument is
specified.

Signed-off-by: James O. D. Hunt <jamesodhunt@gmail.com>

Signed-off-by: James O. D. Hunt <jamesodhunt@gmail.com>
2 years ago
Gaurav Tyagi ba9e50e93b
Add `:update` that will write the changes if the file has been modified. (#4426)
* add command update that will write the changes if file hasn been modified

* add docs

* update the docs
2 years ago
Michał Zabielski 65edf9c198
fix: repeating repeat operator (#4450) 2 years ago
GabrielDertoni 9fae4b8118 fix: terminal freezing on `shell_insert_output`
This bug occurs on `shell_insert_output` and `shell_append_output`
commands.

The previous implementation would create a child process using the Rust
stdlib's `Command` builder. However, when nothing should be piped in
from the editor, the default value for `stdin` would be used. According
to the Rust stdlib documentation that is `Stdio::inherit` which will
make the child process inherit the parent process' stdin. This would
cause the terminal to freeze.

This change will set the child process' stdin to `Stdio::null` whenever
it doesn't pipe it. In the `if` statement where this change was made
there was an extra condition for windows that I am not sure if would
require some special treatment.
2 years ago
Michael Davis c47ca33137
Render diagnostics in the file picker preview (#4324)
This is mostly for the sake of the diagnostics pickers: without
rendering the diagnostic styles, it's hard to tell where the entries
in the picker are pointing to.
2 years ago
Michael Davis d7d0d5ffb7
lsp: Resolve completion items missing documentation on idle (#4406)
Some language servers may not send the `documentation` field if it
is expensive to compute. Clients can request the missing field with
a completionItem/resolve request.

In this change we use the idle-timeout event to ensure that the current
completion item is resolved.
2 years ago
Alexis (Poliorcetics) Bourget 34389e1d54 nit: Do less allocations in `ui::menu::Item::label` implementations
This complicates the code a little but it often divides by two the number of allocations done by
the functions. LSP labels especially can easily be called dozens of time in a single menu popup,
when listing references for example.
2 years ago
Alexis (Poliorcetics) Bourget 3aea33a415 nit: move an allocation to happen after a `continue`, making sure it's
not done for nothing
2 years ago
Skyler Hawthorne 5a848344a9
fix: write-all crash (#4384)
When we do auto formatting, the code that takes the LSP's response and applies
the changes to the document are just getting the currently focused view and
giving that to the function, basically always assuming that the document that
we're applying the change to is in focus, and not in a background view.

This is usually fine for a single view, even if it's a buffer in the
background, because it's still the same view and the selection will get updated
accordingly for when you switch back to it. But it's obviously a problem for
when there are multiple views, because if you don't have the target document in
focus, it will ask the document to update the wrong view, hence the crash.

The problem with this is picking which view to apply any selection change to.
In the absence of any more data points on the views themselves, we simply pick
the first view associated with the document we are saving.
2 years ago
Nimrod bad49ef2d0
Fix unexpected behavior in delete_word_backward and delete_word_forward (#4392) 2 years ago
Skyler Hawthorne f486f34ebe
flush writes on force quit (#4397)
When force quitting, we need to block on the pending writes to ensure
that write commands succeed before exiting, and also to avoid a crash
when all the views are gone before the auto format call returns from
the LS.
2 years ago
Charlie Groves 7e29ee6dae
Autosave all when the terminal loses focus (#3178)
* Autosave all when the terminal loses focus

* Correct comment on focus config

Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>

* Need a block_try_flush_writes in all quit_all paths

Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
2 years ago
Pascal Kuthe 9af7c1c9f3 Sort by fixed diagnostics/is_preffered within codeaction categories 2 years ago
Pascal Kuthe 189aa0bfcf never sort menu items when no fuzzy matching is possible 2 years ago
Pascal Kuthe dc3527f52d use permalink to vscode repo 2 years ago
Pascal Kuthe 8d8b5d6624 use stable sort instead of allocating new vectors 2 years ago
Pascal Kuthe c70d762a7b sort autocompletins by fuzzy match 2 years ago
Pascal Kuthe 8673c1ec0c sort codeaction by their kind instead of alphabetically 2 years ago
Skyler Hawthorne 6a0b450f55
Fix multi byte auto pairs (#4024)
* Fix test::print for Unicode

The print function was not generating correct translations when
the input has Unicode (non-ASCII) in it. This is due to its use of
String::len, which gives the length in bytes, not chars.

* Fix multi-code point auto pairs

The current code for auto pairs is counting offsets by summing the
length of the open and closing chars with char::len_utf8. Unfortunately,
this gives back bytes, and the offset needs to be in chars.

Additionally, it was discovered that there was a preexisting bug where
the selection was not computed correctly in the case that the cursor
was:

1. a single grapheme in width
2. this grapheme was more than one char
3. the direction of the cursor is backwards
4. a secondary range

In this case, the offset was not being added into the anchor. This was
fixed.

* migrate auto pairs tests to integration

* review comments
2 years ago
Michael Davis 66238e8556 Silence dead_code warning on AppBuilder::with_config
This function is not currently used but is likely to be useful in
the future, so this change silences the dead_code warning.
2 years ago
Michael Davis 313579d27c Remove language-server configuration in integration tests
This change removes language server configuration from the default
languages.toml config for integration tests. No integration-tests
currently depend on the availability of a language server but if any
future test needs to, it may provide a language server configuration
by passing an override into the `test_syntax_conf` helper.

Language-servers in integration tests cause false-positive failures
when running integration tests in GitHub Actions CI. The Windows
runner appears to have `clangd` installed and all OS runners have
the `R` binary installed but not the `R` language server package.
If a test file created by `tempfile::NamedTempFile` happens to have a
file extension of `r`, the test will most likely fail because the
R language server will fail to start and will become a broken pipe,
meaning that it will fail to shutdown within the timeout, causing a
false-positive failure. This happens surprisingly often in practice.

Language servers (especially rust-analyzer) also emit unnecessary
log output when initializing, which this change silences.
2 years ago
Michael Davis 1243db11a5 Use helix_view::apply_transaction in integration-tests
`helix_view::apply_transaction` closes over `Document::apply` and
`View::apply` to ensure that jumplist entries are updated when a
document changes from a transaction. `Document::apply` shouldn't
be called directly - this helper function should be used instead.
2 years ago
Matouš Dzivjak 4cff625054
chore(view): remove indent_unit helper fn (#4389) 2 years ago
Matouš Dzivjak eee8362015
fix(commands): no last picker error (#4387) 2 years ago
Blaž Hrastnik 78c0cdc519
Merge pull request #2267 from dead10ck/fix-write-fail
Write path fixes
2 years ago
Fisher Darling 4174b25b3d
Pretty print `tree-sitter-subtree` expression (#4295) 2 years ago
Skyler Hawthorne 756253b43f fix tree_sitter_scopes 2 years ago
Skyler Hawthorne e645804b0a Editor::flush_writes returns an error 2 years ago
Blaž Hrastnik 52ba550098 Use flush_writes in application.close() 2 years ago
Blaž Hrastnik 55b50d9e83 Seems like this flush is unnecessary 2 years ago
Blaž Hrastnik b0212b3611 Deduplicate flush_writes 2 years ago
Blaž Hrastnik 30c93994b5 Use a single save_queue on the editor 2 years ago