Add readme

README.md

@@ -0,0 +1,15 @@
+# yampad-rs
+
+This is a firmware for the [yampad](https://github.com/mattdibi/yampad) using a rp2040 microcontroller written in rust.
+
+## Install this thing
+
+Put the rp2040 into boot mode by holding the boot button and pressing reset until it shows up as a storage
+device on your computer. 
+After than run 
+```
+  cargo run --release
+```
+to move the firmware to the controller.
+
+That's it.