#!/bin/bash inf() { echo -e "\e[1m♠ $@\e[0m" } err() { echo -e "\e[1m\e[31m✗ $@\e[0m" } response="" prompt() { printf "\e[1m\e[33m$@ : \e[0m" read response } # --------------------------------- yn="" yesno() { dialog --title Citrine --yesno "$@" 10 80 yn=$? } dumptitle="" dump() { dialog --title "${dumptitle}" --no-collapse --msgbox "$@" 0 0 } msgdat="" msgbox(){ msgdat=$(dialog --title Citrine --inputbox "$@" --stdout 10 80) } # -------------------------- if [[ "$EUID" != "0" ]]; then err "Run as root" exit 1 fi inf "Checking pacman keyrings" pacman-key --init pacman-key --populate archlinux pacman-key --populate crystal yesno "Do you need a keyboard layout other than QWERTY US?" KBD="$yn" echo "KBD=$KBD" # TODO: layout select in dialog if [[ "$KBD" == "0" || "$KBD" == "0" ]]; then prompt "We're going to show the list of keymaps in less. Do you know how to exit less? (Y/n)" UL="$response" if [[ "$UL" == "n" ]]; then inf "Once we enter less, use arrows to scroll, and q to quit once you've found the right file." inf "Press enter to go" read fi localectl list-keymaps prompt "Correct keymap" KMP="$response" echo "KMP=$response" loadkeys ${KMP} fi clear yesno "Would you like to partition manually?" echo "PMODE=$yn" PMODE="$yn" dumptitle="System Disks" diskdat="$(fdisk -l | grep Disk | grep sectors --color=never)" dump "$diskdat" MANUAL="no" DISK="" if [[ "$PMODE" == "0" ]]; then MANUAL="yes" else msgbox "Install target WILL BE FULLY WIPED" echo "DISK=$msgdat" DISK="$msgdat" if ! fdisk -l ${DISK}; then dumptitle="ERROR" dump "Seems like $DISK doesn't exist. Did you typo?" exit 1 fi fi if [[ $DISK == *"nvme"* ]]; then inf "Seems like this is an NVME disk. Noting" NVME="yes" else NVME="no" fi echo "NVME=$NVME" if [[ -d /sys/firmware/efi/efivars ]]; then inf "Seems like this machine was booted with EFI. Noting" EFI="yes" else EFI="no" fi echo "EFI=$EFI" dumptitle="Please confirm" if [[ "$EFI" == "yes" ]]; then dump "This PC seems to *have* booted with UEFI. Press enter to confirm, or Control+C to cancel" else dump "This PC seems to *not* have booted with UEFI. Press enter to aknowledge, or press Control+C if this seems wrong." fi inf "Setting system clock via network" timedatectl set-ntp true if [[ "$MANUAL" == "no" ]]; then dumptitle="CAUTION!" dump "This is your last chance to avoid deleting critical data on $DISK. If you're not sure, press Control+C NOW!" echo "Partitioning disk" if [[ "$EFI" == "yes" ]]; then parted ${DISK} mklabel gpt --script parted ${DISK} mkpart fat32 0 300 --script parted ${DISK} mkpart ext4 300 100% --script inf "Partitioned ${DISK} as an EFI volume" else parted ${DISK} mklabel msdos --script parted ${DISK} mkpart primary ext4 0% 100% --script inf "Partitioned ${DISK} as an MBR volume" fi if [[ "$NVME" == "yes" ]]; then if [[ "$EFI" == "yes" ]]; then inf "Initializing ${DISK} as NVME EFI" mkfs.vfat ${DISK}p1 mkfs.btrfs -f ${DISK}p2 mount ${DISK}p2 /mnt cd /mnt btrfs subvolume create @ btrfs subvolume create @home btrfs subvolume create @var cd / umount /mnt mount -o noatime,compress=zstd,space_cache,subvol=@ ${DISK}p2 /mnt mkdir -p /mnt/{home,var,boot/efi} mount -o noatime,compress=zstd,space_cache,subvol=@home ${DISK}p2 /mnt/home mount -o noatime,compress=zstd,space_cache,subvol=@var ${DISK}p2 /mnt/var mount ${DISK}p1 /mnt/boot/efi else inf "Initializing ${DISK} as NVME MBR" mkfs.btrfs -f ${DISK}p1 mount ${DISK}p1 /mnt cd /mnt btrfs subvolume create @ btrfs subvolume create @home btrfs subvolume create @var cd / umount /mnt mount -o noatime,compress=zstd,space_cache,subvol=@ ${DISK}p1 /mnt mkdir -p /mnt/{home,var} mount -o noatime,compress=zstd,space_cache,subvol=@home ${DISK}p1 /mnt/home mount -o noatime,compress=zstd,space_cache,subvol=@var ${DISK}p1 /mnt/var mount ${DISK}p1 /mnt fi else if [[ "$EFI" == "yes" ]]; then inf "Initializing ${DISK} as EFI" mkfs.vfat -F32 ${DISK}1 mkfs.btrfs -f ${DISK}2 mount ${DISK}2 /mnt cd /mnt btrfs subvolume create @ btrfs subvolume create @home btrfs subvolume create @var cd / umount /mnt mount -o noatime,compress=zstd,space_cache,subvol=@ ${DISK}2 /mnt mkdir -p /mnt/{home,var,boot/efi} mount -o noatime,compress=zstd,space_cache,subvol=@home ${DISK}2 /mnt/home mount -o noatime,compress=zstd,space_cache,subvol=@var ${DISK}2 /mnt/var mount ${DISK}1 /mnt/boot/efi else inf "Initializing ${DISK} as MBR" mkfs.btrfs -f ${DISK}1 mount ${DISK}1 /mnt cd /mnt btrfs subvolume create @ btrfs subvolume create @home btrfs subvolume create @var cd / umount /mnt mount -o noatime,compress=zstd,space_cache,subvol=@ ${DISK}1 /mnt mkdir -p /mnt/{home,var} mount -o noatime,compress=zstd,space_cache,subvol=@home ${DISK}1 /mnt/home mount -o noatime,compress=zstd,space_cache,subvol=@var ${DISK}1 /mnt/var fi fi else clear dumptitle="Read carefully!" dump "You have chosen manual partitioning.\ We're going to drop to a shell for you to partition, but first, PLEASE READ these notes.\ Before you exit the shell, make sure to format and mount a partition for / at /mnt." if [[ "$EFI" == "yes" ]]; then mkdir -p /mnt/boot/efi dump "Additionally, since this machine was booted with UEFI, please make sure to make a 200MB or greater partition\ of type VFAT and mount it at /mnt/boot/efi" else msgbox "Please give me the full path of the device you're planning to partition (needed for bootloader installation later)\ .. Example: /dev/sda" DISK="${msgdat}" fi CONFDONE="NOPE" dumptitle="Citrine" while [[ "$CONFDONE" == "NOPE" ]]; do dump "Press enter to go to a shell. (ZSH)" zsh yesno "All set (and partitions mounted?)" echo "STAT=$yn" STAT="$yn" if [[ "$STAT" == "0" ]]; then if ! findmnt | grep /mnt; then err "Are you sure you've mounted the partitions?" else CONFDONE="YEP" fi fi done fi inf "Verifying network connection" ping -c 1 getcryst.al if [[ ! "$?" == "0" ]]; then dumptitle="Error!" dump "It seems like this system can't reach the internet. Failing here." umount -l /mnt exit 1 fi inf "Setting up base Crystal System" crystalstrap /mnt base linux linux-firmware systemd-sysvcompat networkmanager man-db man-pages texinfo micro sudo curl archlinux-keyring neofetch btrfs-progs if [[ ! "$?" == "0" ]]; then inf "CrystalStrap had some error. Retrying." crystalstrap /mnt base linux linux-firmware systemd-sysvcompat networkmanager man-db man-pages texinfo micro sudo curl archlinux-keyring neofetch btrfs-progs fi if [[ "$EFI" == "yes" ]]; then inf "Installing EFI support package" crystalstrap /mnt efibootmgr refind else inf "Installing Syslinux bootloader" crystalstrap /mnt syslinux fi genfstab -U /mnt > /mnt/etc/fstab clear TZ="/usr/share/place/holder" while [[ ! -f $TZ ]]; do msgbox "Pick a time zone (Format: America/New_York, Europe/London, etc)" PT="$msgdat" TZ="/usr/share/zoneinfo/${PT}" done arch-chroot /mnt ln-sf $TZ /etc/localtime inf "Set TZ to ${TZ}" inf "Syncing hardware offset" arch-chroot /mnt hwclock --systohc echo "en_US.UTF-8 UTF-8" >> /mnt/etc/locale.gen echo "LANG=en_US.UTF-8" > /mnt/etc/locale.conf clear yesno "Do you need more locales than just en_US?" echo "More=$yn" More="$yn" if [[ "$MORE" == "0" ]]; then msgbox "Preferred editor" PRGRM="$msgdat" echo "PGRM=$msgdat" if [[ -x "$(command -v ${PGRM})" ]]; then inf "Attempting to install ${PGRM}" pacman -S ${PGRM} --noconfirm fi dumptitle="Read carefully." dump "When we open the file, please remove the leading # before any locales you need.\ Then, save and exit." ${PGRM} /mnt/etc/locale.gen fi inf "Generating selected locales." arch-chroot /mnt locale-gen echo echo inf "en_US was set as system primary." inf "After install, you can edit /etc/locale.conf to change the primary if desired." inf "Press enter" prompt "" if [[ "$KBD" == "y" || "$KBD" == "Y" ]]; then echo "KEYMAP=${KMP}" > /mnt/etc/vconsole.conf fi clear msgbox "Enter the system hostname" HOSTNAME="$msgdat" echo ${HOSTNAME} > /mnt/etc/hostname echo "127.0.0.1 localhost" > /mnt/etc/hosts yesno "Would you like IPV6?" IPS="$yn" if [[ "$IPS" == "0" ]]; then echo "::1 localhost" >> /mnt/etc/hosts fi echo "127.0.0.1 ${HOSTNAME}.localdomain ${HOSTNAME}" >> /mnt/etc/hosts clear inf "Set a password for root" done="nope" while [[ "$done" == "nope" ]]; do arch-chroot /mnt passwd if [[ "$(echo $?)" == "0" ]]; then done="yep" fi done msgbox "Your username" UN="$msgdat" arch-chroot /mnt useradd -m ${UN} arch-chroot /mnt usermod -aG wheel ${UN} inf "Set password for ${UN}" done="nope" while [[ "$done" == "nope" ]]; do arch-chroot /mnt passwd ${UN} if [[ "$(echo $?)" == "0" ]]; then done="yep" fi done echo >> /mnt/etc/sudoers echo "# Enabled by Crystalinstall (citrine)" >> /mnt/etc/sudoers echo "%wheel ALL=(ALL) ALL" >> /mnt/etc/sudoers if [[ "$EFI" == "yes" ]]; then root="$(findmnt -n -o SOURCE /mnt/ | awk 'BEGIN { FS = "/" }; { print $3 }')" arch-chroot /mnt refind-install echo '"Crystal Linux" "rw root=/dev/placeholder"' > /mnt/boot/refind_linux.conf sed -i "s/placeholder/$root/" /mnt/boot/refind_linux.conf else arch-chroot /mnt curl https://git.getcryst.al/crystal/Syslinux_install_script/raw/branch/master/syslinux-install_update -o /usr/bin/syslinux-install_update arch-chroot /mnt syslinux-install_update -i -a -m fi arch-chroot /mnt systemctl enable NetworkManager arch-chroot pacman-key --init arch-chroot pacman-key --populate archlinux arch-chroot pacman-key --populate crystal clear #yesno "Would you like to install a DE/WM profile?" #echo "DEP=$yn" #DEP="$yn" arch-chroot /mnt pacman -Sy --quiet --noconfirm #if [[ "$DEP" == "0" ]]; then #inf "--- Desktop Environments ---" #inf "- GNOME" #inf "- KDE" #inf "- Xfce" #inf "- Budgie" #inf "Please enter exactly as shown." #prompt "" #echo "DE=$response" #DE="$response" #DM="" #case "$DE" in #"Budgie" | "budgie") # arch-chroot /mnt pacman -S --quiet --noconfirm budgie-desktop gnome # DM="gdm" # ;; #"Gnome" | "GNOME" | "gnome") # arch-chroot /mnt pacman -S --quiet --noconfirm gnome gnome-extra chrome-gnome-shell # DM="gdm" # ;; #"KDE" | "Kde" | "kde") # arch-chroot /mnt pacman -S --quiet --noconfirm plasma kde-applications sddm # DM="sddm" #"Xfce" | "xfce") # arch-chroot /mnt pacman -S --quiet --noconfirm xfce4 xfce4-goodies # DM="sddm" # ;; #esac while [[ "$DE" == "" ]]; do menu=$(dialog --title "Citrine" --menu "Select the Desktop Environment you want to install" 12 100 4 "Official" "Our pre-themed desktop environments" "Third Party (supported)" "Third party Desktop Environments that are supported" "Third Party (unsupported)" "Third Party Desktop Environments that aren't supported" "None/DIY" --stdout) if [[ "$menu" == "Official" ]]; then DE=$(dialog --title "Citrine" --menu "Please choose the DE you want to install" 12 100 2 "Onyx" "Our custom Desktop Environment based on XFCE" "Onyx tiling" "Our custom Desktop Environment based on xfce but with i3 as the wm" --stdout) elif [[ "$menu" == "Third Party (supported)" ]]; then DE=$(dialog --title "Citrine" --menu "Please choose the DE you want to install" 12 100 5 "Gnome" "The Gnome desktop environment" "KDE" "The KDE desktop environment" "Xfce" "The xfce desktop environment" "budgie" "The budgie desktop environment" "Mate" "The Mate desktop environment" --stdout) elif [[ "$menu" == "Third Party (unsupported)" ]]; then DE=$(dialog --title "Citrine" --menu "Please choose the DE you want to install" 12 100 2 "Pantheon" "The Pantheon desktop environment from elementaryos" "Enlightenment" "A very DIY desktop environment, refer to archwiki" --stdout) elif [[ "$menu" == "None/DIY" ]]; then yesno "Are you sure that you dont want to install any DE?" if [[ "$yn" == "0" ]]; then DE="none" DM="none" else [[ "$yn" == "1" ]] DE="" fi fi done if [[ "$DE" == "Onyx" ]]; then #arch-chroot /mnt pacman -S --quiet --noconfirm onyx #DM="lightdm" dumptitle="Desktop Environment" dump "Onyx is not supported yet, please choose another DE" DE="" elif [[ "$DE" == "Onyx tiling" ]]; then #arch-chroot /mnt pacman -S --quiet --noconfirm onyx-tiling #DM="lightdm" dumptitle="Desktop Environment" dump "Onyx is not supported yet, please choose another DE" DE="" elif [[ "$DE" == "Gnome" ]]; then arch-chroot /mnt pacman -S --quiet --noconfirm gnome gnome-extra chrome-gnome-shell DM="gdm" elif [[ "$DE" == "KDE" ]]; then arch-chroot /mnt pacman -S --quiet --noconfirm plasma kde-applications sddm DM="sddm" elif [[ "$DE" == "budgie" ]]; then arch-chroot /mnt pacman -S --quiet --noconfirm budgie-desktop gnome DM="gdm" elif [[ "$DE" == "Mate" ]]; then arch-chroot /mnt pacman -S --quiet --noconfirm mate mate-extra mate-applet-dock mate-applet-streamer DM="gdm" elif [[ "$DE" == "Pantheon" ]]; then arch-chroot /mnt su - ${UN} -c "ame -S gala wingpanel pantheon-applications-menu plank pantheon-geoclue2-agent pantheon-polkit-agent pantheon-print pantheon-settings-daemon lightdm lightdm-pantheon-greeter pantheon-default-settings elementary-icon-theme elementary-wallpapers gtk-theme-elementary ttf-droid ttf-opensans ttf-roboto sound-theme-elementary capnet-assist epiphany pantheon-calculator pantheon-calendar pantheon-camera pantheon-code pantheon-files pantheon-mail pantheon-music pantheon-photos pantheon-screencast pantheon-shortcut-overlay pantheon-terminal pantheon-videos simple-scan pantheon-session pantheon switchboard-plugin-desktop" > /mnt/pantheon-packages.txt DM="lightdm" elif [[ "$DE" == "Enlightenment" ]]; then arch-chroot /mnt pacman -S --quiet --noconfirm enlightenment terminology elif [[ "$DE" == "Xfce" ]]; then arch-chroot /mnt pacman -S --quiet --noconfirm xfce4 xfce4-goodies DM="lightdm" fi fi if [[ "$DM" == "" ]]; then inf "Your selected DE/WM doesn't have a standard display manager. Enter one of the below names, or leave blank for none" inf "- gdm" inf "- sddm" inf "- lightdm (you'll need a greeter package. See Arch Wiki)" inf "- (you can type another Arch package name if you have one in mind)" inf "- [blank] for none" prompt "" ND="$response" echo "ND=$ND" if [[ "$ND" != "" ]]; then inf "Ok, we'll install $ND" DM="$ND" arch-chroot /mnt pacman -S --quiet --noconfirm $DM else inf "Ok, not installing a display manager." fi else arch-chroot /mnt pacman -S --quiet --noconfirm $DM fi if [[ "$DM" != "" ]]; then if [[ "$DM" != "none" ]]; then prompt "Would you like to enable ${DM} for ${DE}? (Y/n)" useDM="$response" if [[ "$useDM" != "n" ]]; then arch-chroot /mnt systemctl enable ${DM} fi fi fi fi prompt "Would you like to add more packages? (Y/n)" MP="$response" if [[ "$MP" != "n" ]]; then prompt "Would you like to use a URL to a package list? (Y/n)" OL="$response" if [[ "$OL" == "n" ]]; then prompt "Write package names" PKGNS="$response" inf "Installing: $PKGNS" arch-chroot /mnt su - ${UN} -c "ame -S ${PKGNS}" else prompt "URL to package list" SRC="$response" PKGS="$(curl ${SRC})" for PKG in PKGS; do arch-chroot /mnt su - ${UN} -c "ame -S ${PKG}" done fi fi inf "Installation should now be complete."