mirror of https://github.com/Trivernis/spydian.git
You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
46 lines
1.9 KiB
Markdown
46 lines
1.9 KiB
Markdown
Spydian [](https://www.codefactor.io/repository/github/trivernis/spydian/overview/master)
|
|
===
|
|
|
|
Summary
|
|
---
|
|
|
|
This python project is the controlling software for the Spyder remote controlled car.
|
|
The car can be controlled with a (XBOX) Joystick and consists of a raspberry pi as core unit,
|
|
several sensors (Gyroscope, Ultrasonic, Camera) and a relay for switching lights and motors on
|
|
and off. The controlling part is achived by using pygame to get direct access to the controller
|
|
events. The software itself is splitted into several libraries for handling specific tasks.
|
|
|
|
Requirements
|
|
---
|
|
|
|
You need to build a basic Spyder setup yourself. This consists of a raspberry
|
|
pi as controlling unit, a gyroscope, a camera, two relays, an ultrasonic sensor and a temperature
|
|
sensor. Notice that you could manipulate the main program (`main.py`) to remove or add sensors.
|
|
The standard pins are:
|
|
|
|
Sensor | Pins
|
|
------------|-------
|
|
Ultrasonic | 11, 7
|
|
Motor-Relay | 16
|
|
Light-Relay | 15
|
|
Temperature | 11, 14
|
|
|
|
The light and the motor are switched on and off with the relay, because the raspberry pi
|
|
doesn't have enough energy to power all motors and lights. So use a seperate energy source
|
|
to power them.
|
|
If you are building your own setup it is recommended to only use the libraries and build the
|
|
main program yourself.
|
|
|
|
Install
|
|
---
|
|
|
|
To install the requirements execute the install.sh script. This script does not install Python but
|
|
uses pip. So first you need to install Python 2 and Python 3 because this software uses both
|
|
versions. You also need to connect all sensors and relays to the specific pins.
|
|
|
|
Usage
|
|
---
|
|
|
|
To execute the software the main.py script needs to be run. Open a console and type
|
|
`sudo python3 main.py`. Notice that the superuser rights are required because the script needs
|
|
access to the GPIO-Pins of the raspberry pi. |