Installation

We provide pre-built binaries on the GitHub Releases page.

Packaging status

OSX

A Homebrew tap is available:

brew tap helix-editor/helix
brew install helix

Linux

NixOS

A flake containing the package is available in the project root. The flake can also be used to spin up a reproducible development shell for working on Helix.

Arch Linux

Binary packages are available on AUR:

Build from source

git clone --recurse-submodules --shallow-submodules -j8 https://github.com/helix-editor/helix
cd helix
cargo install --path helix-term

This will install the hx binary to $HOME/.cargo/bin.

Helix also needs it's runtime files so make sure to copy/symlink the runtime/ directory into the config directory (for example ~/.config/helix/runtime on Linux/macOS). This location can be overriden via the HELIX_RUNTIME environment variable.

Usage

(Currently not fully documented, see the keymappings list for more.)

Registers

Vim-like registers can be used to yank and store text to be pasted later. Usage is similar, with " being used to select a register:

  • "ay - Yank the current selection to register a.
  • "op - Paste the text in register o after the selection.

If there is a selected register before invoking a change or delete command, the selection will be stored in the register and the action will be carried out:

  • "hc - Store the selection in register h and then change it (delete and enter insert mode).
  • "md - Store the selection in register m and delete it.

Special Registers

Register characterContains
/Last search
:Last executed command
"Last yanked text

There is no special register for copying to system clipboard, instead special commands and keybindings are provided. See the keymap for the specifics.

Surround

Functionality similar to vim-surround is built into helix. The keymappings have been inspired from vim-sandwich:

surround demo

  • ms - Add surround characters
  • mr - Replace surround characters
  • md - Delete surround characters

ms acts on a selection, so select the text first and use ms<char>. mr and md work on the closest pairs found and selections are not required; use counts to act in outer pairs.

It can also act on multiple seletions (yay!). For example, to change every occurance of (use) to [use]:

  • % to select the whole file
  • s to split the selections on a search term
  • Input use and hit Enter
  • mr([ to replace the parens with square brackets

Multiple characters are currently not supported, but planned.

Textobjects

Currently supported: word, surround.

textobject-demo

  • ma - Select around the object (va in vim, <alt-a> in kakoune)
  • mi - Select inside the object (vi in vim, <alt-i> in kakoune)
Key after mi or maTextobject selected
wWord
(, [, ', etcSpecified surround pairs

Textobjects based on treesitter, like function, class, etc are planned.

Migrating from Vim

Helix's editing model is strongly inspired from vim and kakoune, and a notable difference from vim (and the most striking similarity to kakoune) is that Helix follows the selection → action model. This means that the whatever you are going to act on (a word, a paragraph, a line, etc) is selected first and the action itself (delete, change, yank, etc) comes second. A cursor is simply a single width selection.

TODO: Mention texobjects, surround, registers

Configuration

To override global configuration parameters, create a config.toml file located in your config directory:

  • Linux and Mac: ~/.config/helix/config.toml
  • Windows: %AppData%\helix\config.toml

LSP

To display all language server messages in the status line add the following to your config.toml:

[lsp]
display-messages = true

Themes

First you'll need to place selected themes in your themes directory (i.e ~/.config/helix/themes), the directory might have to be created beforehand.

To use a custom theme add theme = <name> to your config.toml or override it during runtime using :theme <name>.

The default theme.toml can be found here, and user submitted themes here.

Creating a theme

First create a file with the name of your theme as file name (i.e mytheme.toml) and place it in your themes directory (i.e ~/.config/helix/themes).

Each line in the theme file is specified as below:

key = { fg = "#ffffff", bg = "#000000", modifiers = ["bold", "italic"] }

where key represents what you want to style, fg specifies the foreground color, bg the background color, and modifiers is a list of style modifiers. bg and modifiers can be omitted to defer to the defaults.

To specify only the foreground color:

key = "#ffffff"

if the key contains a dot '.', it must be quoted to prevent it being parsed as a dotted key.

"key.key" = "#ffffff"

Possible modifiers:

Modifier
bold
dim
italic
underlined
slow\_blink
rapid\_blink
reversed
hidden
crossed\_out

Possible keys:

KeyNotes
attribute
keyword
keyword.directivePreprocessor directives (#if in C)
keyword.controlControl flow
namespace
punctuation
punctuation.delimiter
operator
special
property
variable
variable.parameter
type
type.builtin
type.enum.variantEnum variants
constructor
function
function.macro
function.builtin
comment
variable.builtin
constant
constant.builtin
string
number
escapeEscaped characters
labelFor lifetimes
module
ui.background
ui.cursor
ui.cursor.insert
ui.cursor.select
ui.cursor.matchMatching bracket etc.
ui.cursor.primaryCursor with primary selection
ui.linenr
ui.linenr.selected
ui.statusline
ui.statusline.inactive
ui.popup
ui.window
ui.help
ui.text
ui.text.focus
ui.info
ui.info.text
ui.menu
ui.menu.selected
ui.selectionFor selections in the editing area
ui.selection.primary
warningLSP warning
errorLSP error
infoLSP info
hintLSP hint

These keys match tree-sitter scopes. We half-follow the common scopes from macromates language grammars with some differences.

For a given highlight produced, styling will be determined based on the longest matching theme key. So it's enough to provide function to highlight function.macro and function.builtin as well, but you can use more specific scopes to highlight specific cases differently.

Color palettes

You can define a palette of named colors, and refer to them from the configuration values in your theme. To do this, add a table called palette to your theme file:

ui.background = "white"
ui.text = "black"

[palette]
white = "#ffffff"
black = "#000000"

Remember that the [palette] table includes all keys after its header, so you should define the palette after normal theme options.

Keymap

Normal mode

Movement

NOTE: f, F, t and T are not confined to the current line.

KeyDescriptionCommand
h, LeftMove leftmove_char_left
j, DownMove downmove_char_right
k, UpMove upmove_line_up
l, RightMove rightmove_line_down
wMove next word startmove_next_word_start
bMove previous word startmove_prev_word_start
eMove next word endmove_next_word_end
WMove next WORD startmove_next_long_word_start
BMove previous WORD startmove_prev_long_word_start
EMove next WORD endmove_next_long_word_end
tFind 'till next charfind_till_char
fFind next charfind_next_char
TFind 'till previous chartill_prev_char
FFind previous charfind_prev_char
HomeMove to the start of the linegoto_line_start
EndMove to the end of the linegoto_line_end
PageUpMove page uppage_up
PageDownMove page downpage_down
Ctrl-uMove half page uphalf_page_up
Ctrl-dMove half page downhalf_page_down
Ctrl-iJump forward on the jumplist TODO: conflicts tabjump_forward
Ctrl-oJump backward on the jumplistjump_backward
vEnter select (extend) modeselect_mode
gEnter goto modeN/A
mEnter match modeN/A
:Enter command modecommand_mode
zEnter view modeN/A
Ctrl-wEnter window mode (maybe will be remove for spc w w later)N/A
SpaceEnter space modeN/A
KShow documentation for the item under the cursorhover

Changes

KeyDescriptionCommand
rReplace with a characterreplace
RReplace with yanked textreplace_with_yanked
~Switch case of the selected textswitch_case
`Set the selected text to lower caseswitch_to_lowercase
Alt-`Set the selected text to upper caseswitch_to_uppercase
iInsert before selectioninsert_mode
aInsert after selection (append)append_mode
IInsert at the start of the lineprepend_to_line
AInsert at the end of the lineappend_to_line
oOpen new line below selectionopen_below
OOpen new line above selectionopen_above
uUndo changeundo
URedo changeredo
yYank selectionyank
pPaste after selectionpaste_after
PPaste before selectionpaste_before
" <reg>Select a register to yank to or paste fromselect_register
>Indent selectionindent
<Unindent selectionunindent
=Format selectionformat_selections
dDelete selectiondelete_selection
cChange selection (delete and enter insert mode)change_selection

Selection manipulation

KeyDescriptionCommand
sSelect all regex matches inside selectionsselect_regex
SSplit selection into subselections on regex matchessplit_selection
Alt-sSplit selection on newlinessplit_selection_on_newline
;Collapse selection onto a single cursorcollapse_selection
Alt-;Flip selection cursor and anchorflip_selections
CCopy selection onto the next linecopy_selection_on_next_line
Alt-CCopy selection onto the previous linecopy_selection_on_prev_line
(Rotate main selection forwardrotate_selections_backward
)Rotate main selection backwardrotate_selections_forward
Alt-(Rotate selection contents forwardrotate_selection_contents_backward
Alt-)Rotate selection contents backwardrotate_selection_contents_forward
%Select entire fileselect_all
xSelect current line, if already selected, extend to next lineextend_line
XExtend selection to line bounds (line-wise selection)extend_to_line_bounds
Expand selection to parent syntax node TODO: pick a keyexpand_selection
JJoin lines inside selectionjoin_selections
KKeep selections matching the regex TODO: overlapped by hover helpkeep_selections
SpaceKeep only the primary selection TODO: overlapped by space modekeep_primary_selection
Ctrl-cComment/uncomment the selectionstoggle_comments

Insert Mode

KeyDescriptionCommand
EscapeSwitch to normal modenormal_mode
Ctrl-xAutocompletecompletion
Ctrl-wDelete previous worddelete_word_backward

TODO: The search implementation isn't ideal yet -- we don't support searching in reverse, or searching via smartcase.

KeyDescriptionCommand
/Search for regex patternsearch
nSelect next search matchsearch_next
NAdd next search match to selectionextend_search_next
*Use current selection as the search patternsearch_selection

Unimpaired

Mappings in the style of vim-unimpaired

KeyDescriptionCommand
[dGo to previous diagnosticgoto_prev_diag
]dGo to next diagnosticgoto_next_diag
[DGo to first diagnostic in documentgoto_first_diag
]DGo to last diagnostic in documentgoto_last_diag
[spaceAdd newline aboveadd_newline_above
]spaceAdd newline belowadd_newline_below

Shell

KeyDescriptionCommand
\|Pipe each selection through shell command, replacing with outputshell_pipe
A-\|Pipe each selection into shell command, ignoring outputshell_pipe_to
!Run shell command, inserting output before each selectionshell_insert_output
A-!Run shell command, appending output after each selectionshell_append_output
$Pipe each selection into shell command, keep selections where command returned 0shell_keep_pipe

Select / extend mode

I'm still pondering whether to keep this mode or not. It changes movement commands to extend the existing selection instead of replacing it.

NOTE: It's a bit confusing at the moment because extend hasn't been implemented for all movement commands yet.

View mode

View mode is intended for scrolling and manipulating the view without changing the selection.

KeyDescriptionCommand
z , cVertically center the linealign_view_center
tAlign the line to the top of the screenalign_view_top
bAlign the line to the bottom of the screenalign_view_bottom
mAlign the line to the middle of the screen (horizontally)align_view_middle
jScroll the view downwardsscroll_down
kScroll the view upwardsscroll_up

Goto mode

Jumps to various locations.

NOTE: Some of these features are only available with the LSP present.

KeyDescriptionCommand
gGo to the start of the filegoto_file_start
eGo to the end of the filegoto_last_line
hGo to the start of the linegoto_line_start
lGo to the end of the linegoto_line_end
sGo to first non-whitespace character of the linegoto_first_nonwhitespace
tGo to the top of the screengoto_window_top
mGo to the middle of the screengoto_window_middle
bGo to the bottom of the screengoto_window_bottom
dGo to definitiongoto_definition
yGo to type definitiongoto_type_definition
rGo to referencesgoto_reference
iGo to implementationgoto_implementation
aGo to the last accessed/alternate filegoto_last_accessed_file

Match mode

Enter this mode using m from normal mode. See the relavant section in Usage for an explanation about surround and textobject usage.

KeyDescriptionCommand
mGoto matching bracketmatch_brackets
s <char>Surround current selection with <char>surround_add
r <from><to>Replace surround character <from> with <to>surround_replace
d <char>Delete surround character <char>surround_delete
a <object>Select around textobjectselect_textobject_around
i <object>Select inside textobjectselect_textobject_inner

Object mode

TODO: Mappings for selecting syntax nodes (a superset of [).

Window mode

This layer is similar to vim keybindings as kakoune does not support window.

KeyDescriptionCommand
w, Ctrl-wSwitch to next windowrotate_view
v, Ctrl-vVertical right splitvsplit
h, Ctrl-hHorizontal bottom splithsplit
q, Ctrl-qClose current windowwclose

Space mode

This layer is a kludge of mappings I had under leader key in neovim.

KeyDescriptionCommand
fOpen file pickerfile_picker
bOpen buffer pickerbuffer_picker
sOpen symbol picker (current document)symbol_picker
aApply code actioncode_action
'Open last fuzzy pickerlast_picker
wEnter window modeN/A
spaceKeep primary selection TODO: it's here because space mode replaced itkeep_primary_selection
pPaste system clipboard after selectionspaste_clipboard_after
PPaste system clipboard before selectionspaste_clipboard_before
yJoin and yank selections to clipboardyank_joined_to_clipboard
YYank main selection to clipboardyank_main_selection_to_clipboard
RReplace selections by clipboard contentsreplace_selections_with_clipboard

Picker

Keys to use within picker. Remapping currently not supported.

KeyDescription
Up, Ctrl-pPrevious entry
Down, Ctrl-nNext entry
Ctrl-spaceFilter options
EnterOpen selected
Ctrl-hOpen horizontally
Ctrl-vOpen vertically
Escape, Ctrl-cClose picker

Key Remapping

One-way key remapping is temporarily supported via a simple TOML configuration file. (More powerful solutions such as rebinding via commands will be available in the feature).

To remap keys, write a config.toml file in your helix configuration directory (default ~/.config/helix in Linux systems) with a structure like this:

# At most one section each of 'keys.normal', 'keys.insert' and 'keys.select'
[keys.normal]
a = "move_char_left" # Maps the 'a' key to the move_char_left command
w = "move_line_up" # Maps the 'w' key move_line_up
"C-S-esc" = "extend_line" # Maps Control-Shift-Escape to extend_line
g = { a = "code_action" } # Maps `ga` to show possible code actions

[keys.insert]
"A-x" = "normal_mode" # Maps Alt-X to enter normal mode
j = { k = "normal_mode" } # Maps `jk` to exit insert mode

Control, Shift and Alt modifiers are encoded respectively with the prefixes C-, S- and A-. Special keys are encoded as follows:

Key nameRepresentation
Backspace"backspace"
Space"space"
Return/Enter"ret"
<"lt"
>"gt"
+"plus"
-"minus"
;"semicolon"
%"percent"
Left"left"
Right"right"
Up"up"
Home"home"
End"end"
Page"pageup"
Page"pagedown"
Tab"tab"
Back"backtab"
Delete"del"
Insert"ins"
Null"null"
Escape"esc"

Commands can be found in the source code at helix-term/src/commands.rs

Hooks