Add a restart debug session command, which would issue a
[Restart Request][1], if the debugger supports it and a session is
running. It uses the same arguments and requests used to start the
initial session, when recreating it.
It builds upon #5532, making use of the changes to the termination
workflow of a session.
[1]: https://microsoft.github.io/debug-adapter-protocol/specification#Requests_RestartCloses: #5594
Signed-off-by: Filip Dutescu <filip.dutescu@gmail.com>
* Fix lack of space for popup crash
* Fix saturating -> wrapping
* Fix wrapping -> saturating (I am an idiot)
* Remove useless "mut" in helix-tui/src/buffer.rs
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Remove redundant bound-check
* Return bound-check back
* Add bound-check for set_style
* Remove set_style bound-check
* Revert bound-check
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
This is a workaround for a freeze when suspending Helix with C-z on
non-Windows systems. The check for the keyboard enhancement protocol
locks up crossterm's internal event reading/polling system by trying to
set up multiple concurrent readers. `input_stream.next()` sets up one
reader looking for regular crossterm events while the
`supports_keyboard_enhancement` query sets up another looking for
internal events. The latter hangs for two seconds or until the former
yields an event. By handling signals first we don't lock up the mutex
by trying to read keyboard events.
Since crossterm 0.26.x, we receive press/release keyboard events on
Windows always. We can ignore the release events though to emulate
the behavior of keyboard input on Windows on crossterm 0.25.x.
When the Kitty Keyboard Protocol is enabled, S-backspace is
distinguished from backspace with no modifiers. This is awkward when
typing because it's very easy to accidentally hold shift and press
backspace temporarily when typing capital letters.
Kakoune (which is also a Kitty Keyboard Protocol application) treats
S-backspace as backspace too:
3150e9b3cd/src/input_handler.cc (L1275)
Check if the stack frames contain the thread id and the frame before
trying to get the frame id. If case any of the two fails to be
found, provide the user with messages to inform them of the issue and
gracefully return.
Closes: #5625
Signed-off-by: Filip Dutescu <filip.dutescu@gmail.com>
Send a `Disconnect` DAP request if the `Terminated` event is received.
According to the specification, if the debugging session was started by
as `launch`, the debuggee should be terminated alongside the session. If
instead the session was started as `attach`, it should not be disposed of.
This default behaviour can be overriden if the `supportTerminateDebuggee`
capability is supported by the adapter, through the `Disconnect` request
`terminateDebuggee` argument, as described in
[the specification][discon-spec].
This also implies saving the starting command for a debug sessions, in
order to decide which behaviour should be used, as well as validating the
capabilities of the adapter, in order to decide what the disconnect should
do.
An additional change made is handling of the `Exited` event, showing a
message if the exit code is different than `0`, for the user to be aware
off the termination failure.
[discon-spec]: https://microsoft.github.io/debug-adapter-protocol/specification#Requests_DisconnectCloses: #4674
Signed-off-by: Filip Dutescu <filip.dutescu@gmail.com>
The completion component has a separate branch for handling the
Escape key but it can use the `ignore_escape_key` helper added for
signature-help instead.
This should not cause a behavior change - it's just cleaning up the
completion component.
* feat(ui): deprecated completions
Mark deprecated completions using strike-through
(CROSSED_OUT modifier). The deprection information
is taken either from the `deprecated` field of the
completion item or from the completion tags.
The field seems to be the older way of passing
the deprecated information and it was already
marked as deprecated for Symbol. In completion
item the field is still valid but it seems that
the LSP is moving in the general direction of using
tags for this kind of information and as such
relying on tags as well seems reasonable and
future-proof.
So far LSP always required that `PositionEncoding.characters` is an
UTF-16 offset. Now that LSP 3.17 is available in `lsp-types` request
the server to send char offsets (UTF-32) or byte offsets (UTF-8)
instead. For compatability with old servers, UTF-16 remains as the
fallback as required by the standard.
* Make `m` textobject look for pairs enclosing selections
Right now, this textobject only looks for pairs that surround the
cursor. This ensures that the pair found encloses each selection, which
is likely to be intuitively what is expected of this textobject.
* Simplification of match code
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Adjust logic for ensuring surround range encloses selection
Prior, it was missing the case where the start of the selection came
before the opening brace. We also had an off-by-one error where if the
end of the selection was on the closing brace it would not work.
* Refactor to search for the open pair specifically to avoid edge cases
* Adjust wording of autoinfo to reflect new functionality
* Implement tests for surround functionality in new integration style
* Fix handling of skip values
* Fix out of bounds error
* Add `ma` version of tests
* Fix formatting of tests
* Reduce indentation levels for readability, and update comments
* Preserve each selection's direction with enclosing pair surround
* Add test case for multiple cursors resulting in overlap
* Mark known failures as TODO
* Make tests multi-threaded or they fail
* Cargo fmt
* Fix typos in integration test comments
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
Example:
```
test
testitem
```
Select line 2 with x, then type Alt-C; Helix will go into an infinite
loop. The saturating_sub keeps the head_row and anchor_row pinned at 0,
and a selection is never made since the first line is too short.
`:write` and other file-saving commands now check the file modification
time before writing to protect against overwriting external changes.
Co-authored-by: Gustavo Noronha Silva <gustavo@noronha.dev.br>
Co-authored-by: LeoniePhiline <22329650+LeoniePhiline@users.noreply.github.com>
Co-authored-by: Pascal Kuthe <pascal.kuthe@semimod.de>
This matches the behavior from 42ad1a9e04
but for the first and last change. The selection rules are the same
as for goto_next/prev_change: additions and modifications select the
added and modified range while deletions are represented with a point.
This will allow testing more of the code base, as well as enable UI-
specific testing.
Debug mode builds are prohibitively slow for the tests, mostly
because of the concurrency write tests. So there is now a profile for
integration tests that sets the optimization level to 2 for a few helix
crates, and lowers the number of rounds of concurrent writes to 1000.
* hide duplicate symlinks from the picker
* Apply suggestions from code review
Co-authored-by: g-re-g <123515925+g-re-g@users.noreply.github.com>
* minor stylistic fix
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
---------
Co-authored-by: g-re-g <123515925+g-re-g@users.noreply.github.com>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
This change makes `ms<ret>` work similarly to `t<ret>` and related
find commands: when the next event is a keypress of Enter, surround
the selection with the document's line-endings.
* rework positioning/rendering, enables softwrap/virtual text
This commit is a large rework of the core text positioning and
rendering code in helix to remove the assumption that on-screen
columns/lines correspond to text columns/lines.
A generic `DocFormatter` is introduced that positions graphemes on
and is used both for rendering and for movements/scrolling.
Both virtual text support (inline, grapheme overlay and multi-line)
and a capable softwrap implementation is included.
fix picker highlight
cleanup doc formatter, use word bondaries for wrapping
make visual vertical movement a seperate commnad
estimate line gutter width to improve performance
cache cursor position
cleanup and optimize doc formatter
cleanup documentation
fix typos
Co-authored-by: Daniel Hines <d4hines@gmail.com>
update documentation
fix panic in last_visual_line funciton
improve soft-wrap documentation
add extend_visual_line_up/down commands
fix non-visual vertical movement
streamline virtual text highlighting, add softwrap indicator
fix cursor position if softwrap is disabled
improve documentation of text_annotations module
avoid crashes if view anchor is out of bounds
fix: consider horizontal offset when traslation char_idx -> vpos
improve default configuration
fix: mixed up horizontal and vertical offset
reset view position after config reload
apply suggestions from review
disabled softwrap for very small screens to avoid endless spin
fix wrap_indicator setting
fix bar cursor disappearring on the EOF character
add keybinding for linewise vertical movement
fix: inconsistent gutter highlights
improve virtual text API
make scope idx lookup more ergonomic
allow overlapping overlays
correctly track char_pos for virtual text
adjust configuration
deprecate old position fucntions
fix infinite loop in highlight lookup
fix gutter style
fix formatting
document max-line-width interaction with softwrap
change wrap-indicator example to use empty string
fix: rare panic when view is in invalid state (bis)
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* improve documentation for positoning functions
* simplify tests
* fix documentation of Grapheme::width
* Apply suggestions from code review
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* add explicit drop invocation
* Add explicit MoveFn type alias
* add docuntation to Editor::cursor_cache
* fix a few typos
* explain use of allow(deprecated)
* make gj and gk extend in select mode
* remove unneded debug and TODO
* mark tab_width_at #[inline]
* add fast-path to move_vertically_visual in case softwrap is disabled
* rename first_line to first_visual_line
* simplify duplicate if/else
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
The new version of the `toml` crate is based on `toml_edit` and does
not support zero copy deserialization anymore. So we need to deserialize
`String` instead of `&str` in the keympa
increment/decrement (C-a/C-x) had some buggy behavior where selections
could be offset incorrectly or the editor could panic with some edits
that changed the number of characters in a number or date. These stemmed
from the automatic jumping behavior which attempted to find the next
date or integer to increment. The jumping behavior also complicated the
code quite a bit and made the behavior somewhat difficult to predict
when using many cursors.
This change removes the automatic jumping behavior and only increments
or decrements when the full text in a range of a selection is a number
or date. This simplifies the code and fixes the panics and buggy
behaviors from changing the number of characters.
After changes in #5239, the loaded configuration wasn't stored,
resulting in a success message even if the instance kept the previous
configuration values.
Commit 1b89d3e535 introduced a regression
where opening a new file would no longer work, because attempting to
canonicalize its path would lead to a "No such file or directory"
error. Fall back to opening a new file when encountering an error to
fix this case.
This commit addresses issue 5193, where the author
requested that the name of the binary needed is printed along
with the rest of the health information.
This commit adds a format! macro which formats in the name of the
binary and then it will be printed along with the rest of the
debug information. The value in cmd is referenced to the call
to which, and then consumed upon the call to format!
This roughly matches the behavior of the diagnostic picker: when
jumping to a diagnostic with `[d`/`]d`/`[D`/`]D`, the range of the
diagnostic is selected instead of the start point.
A language server might send None as the response to workspace symbols.
We should treat this as the empty Vec rather than the server sending
an error status. This fixes the interaction with gopls which uses
None to mean no matching symbols.
If the new results shown by the picker select a file that hasn't been
previewed before, the idle timeout would not trigger highlighting on
that file. With this change, we reset the idle timeout and allow that
file to be highlighted on the next idle timeout event.
This change uses the idle-timeout event to trigger fetching new results
in the DynamicPicker, so idle-timeout becomes a sort of debounce. This
prevents querying the language server overly aggressively.
Most language servers limit the number of workspace symbols that
are returned with an empty query even though all symbols are
supposed to be returned, according to the spec (for perfomance
reasons). This patch adds a workspace symbol picker based on a
dynamic picker that allows re-requesting the symbols on every
keypress (i.e. when the picker query text changes). The old behavior
has been completely replaced, and I have only tested with
rust-analyzer so far.
The error messages for a theme that failed to be deserialized (or
otherwise failed to load) were covered up by the context/with_context
calls:
* The log message for a bad theme configured in config.toml would only
say "Failed to deserilaize theme"
* Selecting a bad theme via :theme would show "Theme does not exist"
With these changes, we let the TOML deserializer errors bubble up, so
the error messages can now say the line number of a duplicated
key - and that key's name - when a theme fails to load because of a
duplicated key.
Providing a theme which does not exist to :theme still gives a helpful
error message: "No such file or directory."
* Reset mode when changing buffers
This is similar to the change in
e4c9d4082a139aac3aea4506918171b96e81f5b9: reset the editor to normal
mode when changing buffers. Usually the editor is already in normal
mode but it's possible to setup insert-mode keybindings that change
buffers.
* Move normal mode entering code to Editor
This should be called internally in the Editor when changing documents
(Editor::switch) or changing focuses (Editor::focus).
* add command and keybding to jump to next/prev hunk
* add textobject for change
* Update helix-vcs/src/diff.rs
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* select entire hunk instead of first char
* fix selection range
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Add `View::ensure_cursor_in_view_center` to adjust view after searching and jumping
Also `offset_coodrs_to_in_view` was refactored to reduce duplicated position calculations.
* Fix a wrong offset calculation in `offset_coords_to_in_view_center`
It ignored `scrolloff` if `centering` is false.
Completion edits - either basic `insert_text` strings or structured
`text_edit`s - are assumed by the LSP spec to apply to the current
cursor (or at least the trigger point). We can use the range (if any)
and text given by the Language Server to create a transaction that
changes all ranges in the current selection though, allowing auto-
complete to affect multiple cursors.
* Change default TS object bindings
Changes 'match inside/around' bindings for:
- type definition from `c` to `t`
- comments from `o` to `c`
- tests from `t` to `T`
Also changes those for the `]` / `[` bindings.
* Update docs for changed keybinds
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Add a undo/redo split test case for crossing branches
* history: Switch up/down transaction chaining order
The old code tends to work in practice because, usually, either up_txns
or down_txns are empty. When both have contents though, we can run into
a panic trying to compose them all since they will disagree on the
length of the text. This fixes the panic test case in the parent
commit.
* Show (git) diff signs in gutter (#3890)
Avoid string allocation when git diffing
Incrementally diff using changesets
refactor diffs to be provider indepndent and improve git implementation
remove dependency on zlib-ng
switch to asynchronus diffing with similar
Update helix-vcs/Cargo.toml
fix toml formatting
Co-authored-by: Ivan Tham <pickfire@riseup.net>
fix typo in documentation
use ropey reexpors from helix-core
fix crash when creating new file
remove useless use if io::Cursor
fix spelling mistakes
implement suggested improvement to repository loading
improve git test isolation
remove lefover comments
Co-authored-by: univerz <univerz@fu-solution.com>
fixed spelling mistake
minor cosmetic changes
fix: set self.differ to None if decoding the diff_base fails
fixup formatting
Co-authored-by: Ivan Tham <pickfire@riseup.net>
reload diff_base when file is reloaded from disk
switch to imara-diff
Fixup formatting
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Redraw buffer whenever a diff is updated.
Only store hunks instead of changes for individual lines to easily allow
jumping between them
Update to latest gitoxide version
Change default diff gutter position
Only update gutter after timeout
* update diff gutter synchronously, with a timeout
* Apply suggestions from code review
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* address review comments and ensure lock is always aquired
* remove configuration for redraw timeout
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
This matches the insert-mode behavior for Vim and Kakoune: if the
current line is empty except for whitespace, `<ret>` should insert a
line ending at the beginning of the line, moving any indentation to the
next line.
The 'revisions' field on History can't be treated as linear: each
Revision in the revisions Vec has a parent link and an optional child
link. We can follow those to unroll the recent history.
When using undo/redo, the history revision can be decremented. In that
case we should apply the inversions since the given revision in
History::changes_since. This prevents panics with jumplist operations
when a session uses undo/redo to move the jumplist selection outside
of the document.
This case panics since undo/redo call View::apply and here, the edit
that moves the jumplist selection out-of-bounds is not yet applied when
View::apply is called in undo/redo. View::apply should only be called
by the EditorView now.
* Add a test case for updating jumplists across windows
* Apply transactions to all views on history changes
This ensures that jumplist selections follow changes in documents, even
when there are multiple views (for example a split where both windows
edit the same document).
* Leave TODOs for cleaning up View::apply
* Use Iterator::reduce to compose history transactions
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Language Servers may signal that they do not support a method in
the initialization result (server capabilities). We can check these
when making LSP requests and hint in the status line when a method
is not supported by the server. This can also prevent crashes in
servers which assume that clients do not send requests for methods
which are disabled in the server capabilities.
There is an existing pattern the LSP client module where a method
returns `Option<impl Future<Output = Result<_>>>` with `None` signaling
no support in the server. This change extends this pattern to the rest
of the client functions. And we log an error to the statusline for
manually triggered LSP calls which return `None`.
Previously, jumplists could grow unchecked. Every transaction is
applied to jumplist selections to ensure that they are up to date
and within document bounds, so this would cause every edit to become
more expensive as jumplist lengths increased throughout a session.
Setting a maximum number of entries limits the cost.
Vim and Neovim limit their jumplists:
* b298fe6cba/src/structs.h (L141)
* e8cc489acc/src/nvim/mark_defs.h (L57)
Notably, Kakoune does not. In Kakoune, changes are applied to jumplist
entries lazily as you hit `<C-o>`/`<C-i>` though, so Kakoune doesn't
have the same growing cost concerns. Kakoune also does not have a
concept of a View which limits the cost further.
Vim and Neovim limit to 100. This seems unreasonably high to me so I've
set this to 30 to start. We can increase if this is problematically
low.
d6323b7cbc changed the behavior of paste
to select the newly inserted text. This is preferrable in normal mode
because it's useful to be able to act on the new text. This behavior
is worse for insert or select mode though:
* In insert mode, the cursor ends up on the last character of the newly
selected text, so further typing inserts text before the last
character.
* In select mode, the current selection is replaced with the new text
selection which doesn't extend the current selection. With this
change, the selection is extended to include the new text.
This aligns the behavior more closely with Kakoune, but it's
coincidental instead of intentional: Kakoune doesn't implement
bracketed paste (AFAIK) which causes this behavior in insert mode,
and Kakoune doesn't have a select mode.
Previously, commands such as `r<tab>` (replace with tab) or `t<tab>`
(select till tab) had no effect. This is because `KeyCode::Tab` needs
special treatment (like `KeyCode::Enter`).
This change handles a language server exiting. This was a UX sore-spot:
if a language server crashed, Helix did not recognize the exit and
continued to send requests to it. All requests would timeout since they
would not receive responses. This would also hold-up Helix closing
itself down since it would try to gracefully shutdown the server which
is implemented in the LSP spec as a request.
We could attempt to automatically restart the language server on crash.
I left this for future work since that change will need to be slightly
complicated: it will need to cover the case of a language server
repeatedly crashing.
d7d0d5ffb7 resolves completion items on
the idle-timeout event. The `Completion::resolve_completion_item`
function blocks on the LSP request though, which blocks the compositor
and in turn blocks the event loop. So until the language server returns
the resolved completion item, Helix is unable to respond to keypresses
or other LSP messages.
This is typically ok since the resolution request is fast but for some
language servers this can be problematic, and ideally we shouldn't be
blocking like this anyways.
When receiving a `completionItem/resolve` request, the Volar server
sends a `workspace/configuration` request to Helix and blocks itself
on the response, leading to a deadlock. Eventually the resolve request
times out within Helix but Helix is locked up and unresponsive in that
window.
This change resolves the completion item without blocking the
compositor.
PR #4134 switched the autocomplete menu from alphabetical to fuzzy
sorting. This commit removes the still existing filtering by prefix and
should enable full fuzzy sorting of the autocomplete menu.
closes#3084, #1807
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
This fixes an edge case for completing shellwords. With a file
"a b.txt" in the current directory, the sequence `:open a\<tab>`
will result in the prompt containing `:open aa\ b.txt`. This is
because the length of the input which is trimmed when replacing with
completion is calculated on the part of the input which is parsed by
shellwords and then escaped (in a separate operation), which is lossy.
In this case it loses the trailing backslash.
The fix provided here refactors shellwords to track both the _words_
(shellwords with quotes and escapes resolved) and the _parts_ (chunks
of the input which turned into each word, with separating whitespace
removed). When calculating how much of the input to delete when
replacing with the completion item, we now use the length of the last
part.
This also allows us to eliminate the duplicate work done in the
`ends_with_whitespace` check.
The text within the command palette used a custom format to display
the keybinding for a command. This change switches to the key sequence
format that we use for pending keys and macros.
dependabot[bot]
Filip Dutescu
Santiago Vrancovich
nuid32
Pascal Kuthe
Alexander Brevig
NomisIV
Michael Davis
lesleyrs
Yusuf Bera Ertan
Guillaume
Triton171
Erasin
Jonathan LEI
Matouš Dzivjak
A-Walrus
Gokul Soumya
Daniel S Poulin
Colton Clemmer
Mike Trinkala
Blaž Hrastnik
Clément Delafargue
Skyler Hawthorne
William Etheredge
Filipe Azevedo
Dylan Bulfin
Ole Krüger
alice
Miguel Madrid-Mencía
ds-cbo
Ivan Tham
gibbz00
mejo13
Nikodem Rabuliński
greg-enbala
Itay123
Pascal Sommer
Lorenzo Albano
Ethan Kiang
Gabriel Dinner-David
Nick
iobtl
willful759
alois31
jliaoh
Jack Allison
Alex Kladov
Eric Thorburn
Sebastian Zivota
Roberto Vidal
Alexander Schlögl
Jummit
ath3
Narazaki Shuji
nosa
sigmaSd
Tshepang Mbambo
Bob
Lennard Hofmann
Austen Adler
ChrHorn