You cannot select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
trivernis
444d1b81ba
|
4 years ago | |
|---|---|---|
| examples | 5 years ago | |
| src | 4 years ago | |
| .gitignore | 5 years ago | |
| Cargo.lock | 5 years ago | |
| Cargo.toml | 5 years ago | |
| LICENSE | 5 years ago | |
| README.md | 4 years ago | |
README.md
LED Strip VM 
A virtual machine for controlling a wifi led strip.
The assemblerish language and bytecode
Instructions
| assy | meaning | bc |
|---|---|---|
| exit <rg> | exists the program with exit code <rg> | 0x01 |
| set <byte> <rg> | sets the register rg to the static value <byte> | 0x02 |
| copy <rg> <rg> | copies the value of register a into register b | 0x03 |
| load (rgp, rgd) | loads the value the pointer register points to into the data register | 0x04 |
| clear <rg> | clears a register (sets it to 0x00) | 0x05 |
| write (rgd, rgp) | writes the value in the data register to the address of the pointer register | 0x06 |
| label <u32> | creates a label at the current position. | 0x07 |
| goto (rgl) | goes to the label with name rgl | 0x08 |
| debug (*) | prints out the state for debug information | 0x09 |
| print <rg> | prints the value of a register | 0x0A |
| add (rgd, rgi, rgo) | adds the value of rgi to the value of rgd and writes the result into rgo | 0x10 |
| sub (rgd, rgi, rgo) | substracts rgi from rgd and writes the result into rgo | 0x11 |
| mul (rgd, rgi, rgo) | multiplies rgd by rgi and writes the result to rgo | 0x12 |
| div (rgd, rgi, rgo) | divides rgd by rgi and writes the result to rgo | 0x13 |
| mod (rgd, rgi, rgo) | applies mod rgd, rgi and writes the result to rgo | 0x14 |
| lsh (rgd, rgi, rgo) | bitshifts rgd by rgi to the left and writes the output to rgo | 0x15 |
| rsh (rgd, rgi,rgo) | bitshifts rgd by rgi to the right and writes the output to rgo | 0x16 |
| and (rgd, rgi, rgo) | bitwise rgd and rgi -> rgo | 0x17 |
| or (rgd, rgi, rgo) | bitwise rgd or rgi -> rgo | 0x18 |
| not (rgd, rgo) | bitwise not rgd -> rgo | 0x19 |
| xor (rgd, rgi, rgo) | bitwise rgd xor rgi -> rgo | 0x1A |
| pow (rgd, rgi, rgo) | rgo to the power of rgi -> rgo | 0x1B |
| nrt (rgd, rgi, rgo ) | the nth root of rgd (n = rgi) -> rgo | 0x1C |
| jg (rgd, rgi, rgl) | jumps to rgl if rgd > rgi | 0x20 |
| jl (rgd, rgi, rgl) | jumps to rgl if rgd < rgi | 0x21 |
| je (rgd, rgi, rgl) | jumps to rgl if rgd == rgi | 0x22 |
| pause (rgd) | pauses for rgd milliseconds | 0xF0 |
| cmd (rgd) (currently not supported) | executes the command in rgd | 0xF1 |
| send (rcr, rcg, rcb) | sends the values stored in the color registers to the strip | 0xF2 |
Registers
| register | type | size | number |
|---|---|---|---|
| rcs | state register | 1 bit | 0x01 |
| rcr | red value | 1 byte | 0x02 |
| rcg | green value | 1 byte | 0x03 |
| rcb | blue value | 1 byte | 0x04 |
| rgd | data | 4 bytes | 0x05 |
| rgp | pointer | 4 bytes | 0x06 |
| rgi | input | 4 bytes | 0x07 |
| rgo | output | 4 bytes | 0x08 |
| rgl | label | 4 bytes | 0x09 |
- changing the state register results in turning the strip on/off
- the rcr, rcg and rcb registers store the rgb value of the strip
- the rgd register is the default register for storing data
- the rgp register stores a pointer to "memory" space
- the rgi register stores the input for operations that require two input values
- the rgo register stores the result of operations
- the rgl register stores as label name that can be jumped to
- comments start with #
The Runtime
The runtime works in three stages.
- Connect to the led strip
- Parse the bytecode into a vector of tokens
- if the instruction creates a label, add the label to the map of labels
- Execute the token vector