Spydian

Summary

This python project is the controlling software for the Spydian remote controlled car. The car can be controlled with a (XBOX) Joystick and consists of a raspberry pi as core unit, several sensors (Gyroscope, Ultrasonic, Camera) and a relay for switching lights and motors on and off. The controlling part is achived by using pygame to get direct access to the controller events. The software itself is splitted into several libraries for handling specific tasks.

Requirements

You need to build a basic Spyder setup yourself. This consists of a raspberry pi as controlling unit, a gyroscope, a camera, two relays, an ultrasonic sensor and a temperature sensor. Notice that you could manipulate the main program (main.py) to remove or add sensors. The standard pins are:

Sensor	Pins
Ultrasonic	11, 7
Motor-Relay	16
Light-Relay	15
Temperature	11, 14

The light and the motor are switched on and off with the relay, because the raspberry pi doesn't have enough energy to power all motors and lights. So use a seperate energy source to power them.

Install

To install the requirements execute the install.sh script. This script does not install Python but uses pip. So first you need to install Python 2 and Python 3 because this software uses both versions. You also need to connect all sensors and relays to the specific pins.

Usage

To execute the software the main.py script needs to be run. Open a console and type sudo python3 main.py. Notice that the superuser rights are required because the script needs access to the GPIO-Pins of the raspberry pi.