This is mostly for the sake of the diagnostics pickers: without
rendering the diagnostic styles, it's hard to tell where the entries
in the picker are pointing to.
Some language servers may not send the `documentation` field if it
is expensive to compute. Clients can request the missing field with
a completionItem/resolve request.
In this change we use the idle-timeout event to ensure that the current
completion item is resolved.
* Autosave all when the terminal loses focus
* Correct comment on focus config
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Need a block_try_flush_writes in all quit_all paths
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Instead of repeatedly checking if it is in_bounds, calculate the
max_indent beforehand and just loop. I added a debug_assert to "prove"
that it never tries drawing out of bounds.
Better performance, and otherwise very long lines with lots of tabs
will wrap around the u16 and come back on the other side, messing up
the beginning skip_levels.
The debug assertion that document diagnostics are sorted incorrectly
panics for cases like `[161..164, 162..162]`. The merging behavior
in the following lines that relies on the assertion only needs the
input ranges to be sorted by `range.start`, so this change simplifies
the assertion to only catch violations of that assumption.
Here we separate the diagnostics by severity and then overlay the Vec
of spans for each severity on top of the highlights. The error
diagnostics end up overlaid on the warning diagnostics, which are
overlaid on the hints, overlaid on info, overlaid on any other severity
(default), then overlaid on the syntax highlights.
This fixes two things:
* Error diagnostics are now always visible when overlapped with other
diagnostics.
* Ghost text is eliminated.
* Ghost text was caused by duplicate diagnostics at the EOF:
overlaps within the merged `Vec<(usize, Range<usize>)>` violate
assumptions in `helix_core::syntax::Merge`.
* When we push a new range, we check it against the last range and
merge the two if they overlap. This is safe because they both
have the same severity and therefore highlight.
The actual merge is skipped for any of these when they are empty, so
this is very fast in practice. For some data, I threw together an FPS
counter which renders as fast as possible and logs the renders per
second.
With no diagnostics, I see an FPS gain from this change from 868 FPS
to 878 (+1.1%) on a release build on a Rust file. On an Erlang file
with 12 error diagnostics and 6 warnings in view (233 errors and 66
warnings total), I see a decrease in average FPS from 795 to 790
(-0.6%) on a release build.
It is easy to forget to call `Document::apply` and/or `View::apply` in
the correct order. This commit introduces a helper function which
closes over both calls.
This change adds View::apply calls for all Document::apply call-sites,
ensuring that changes to a document do not leave invalid entries in
the View's jumplist.
* Implement cursorcolumn
* Add documentation
* Separate column style from line with fallback
* Fallback to cursorcolumn first
* Switch to non-fallback try_get_exact
Add new function `try_get_exact`, which doesn't perform fallback,
and use that instead because the fallback behaviour is being handled
manually.
This change automatically tracks pending text for for commands which use
on-next-key callbacks. For example, `t` will await the next key event
and "t" will be shown in the bottom right-hand corner to show that we're
in a pending state.
Previously, the text for these on-next-key commands needed to be
hard-coded into the command definition which had some drawbacks:
* It was easy to forget to write and clear the pending text.
* If a command was remapped in a custom config, the pending text would
still show the old key.
With this change, pending text is automatically tracked based on the
key events that lead to the command being executed. This works even
when the command is remapped in config and when the on-next-key
callback is nested under some key sequence (for example `mi`).
* Add option to skip the first indent guide
* reorder skip_first option
* change indent-guides.skip_first to a number
* rename skip -> skip_levels
* add skip_levels to the book
* Update book/src/configuration.md
Co-authored-by: A-Walrus <58790821+A-Walrus@users.noreply.github.com>
* Update helix-term/src/ui/editor.rs
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
Co-authored-by: Robin <robinvandijk@klippa.com>
Co-authored-by: A-Walrus <58790821+A-Walrus@users.noreply.github.com>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
When signature help is too large it may cause a panic when it is too
large, now I just make the hover do an intersection with surface to make
sure it never overflow.
* Show "Invalid regex" message on enter (Validate)
* Reset selection on invalid regex
* Add popup for invalid regex
* Replace set_position with position
* Make popup auto close
* fix: Recalculate completion when going through prompt history
* Update completion when the prompt line is changed
It should not be possible to update the line without also updating the
completion since the completion holds an index into the line.
* Fix Prompt::with_line recalculate completion
with_line was the last function where recalculate completion had to be
done manually. This function now also recalculates the completion so
that it's impossible to forget.
* Exit selection when recalculating completion
Keeping the selection index when the completion has been recalculated
doesn't make sense. This clears the selection automatically, removing
most needs to manually clear it.
* Remove &mut on save_filter
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Fixes a panic with a config like:
[keys.normal.space]
x = [":buffer-close"]
by bailing out of the command-execution handling if the document
doesn't exist after handling a command.
When changing focus, the lookup with `current!` may change the
view and end up executing mode transition hooks on the newly
focused view. We should use the same view and document to execute
mode transition hooks so that switching away from a view triggers
history save points.
* Derive Document language name from `languages.toml` `name` key
This changes switches from deriving the language name from the
`languages.toml` `scope` key to `name` (`language_id` in the
`LanguageConfiguration` type). For the most part it works to derive the
language name from scope by chopping off `source.` or `rsplit_once` on
`.` but for some languages we have now like html (`text.html.basic`),
it doesn't. This also should be a more accurate fallback for the
`language_id` method which is used in LSP and currently uses the
`rsplit_once` strategy.
Here we expose the language's name as `language_name` on `Document` and
replace ad-hoc calculations of the language name with the new method.
This is most impactful for the `file-type` statusline element which is
using `language_id`.
* Use `Document::language_name` for the `file-type` statusline element
The `file-type` indicator element in the statusline was using
`Document::language_id` which is meant to be used to for telling
Language Servers what language we're using. That works for languages
with `language-server` configurations in `languages.toml` but shows
text otherwise. The new `Document::language_name` method from the
parent commit is a more accurate way to determine the language.
Ported over from 61365dfbf3 in the `gui` branch. This will allow
adding our own events, most notably an idle timer event (useful
for adding debounced input in [dynamic pickers][1] used by interactive
global search and workspace symbols).
[1]: https://github.com/helix-editor/helix/pull/3110
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Fix tab highlight when tab is partially visible
* Make it style based, and not truncation based
Dealing with truncating is a mess, especially when it comes to wide
unicode graphemes. This way it should work no matter what.
* Inline style calculation into branches
* Fix incorrect indent guide styling
Before the indent guides on top of whitespace inherited the theme
from them. Now they do not.
* Fix dark_plus theme indent_guides
* Use whitespace style as fallback for indent-guide
* Fix dark_plus theme indent_guides
* Move indent_guide style patching out of loop
* add statusline element to display file line endings
* run cargo fmt --all
* change the word *ending* from plural to singular
* support for the unicode-lines feature flag
* Add lsp signature help
* Do not move signature help popup on multiple triggers
* Highlight current parameter in signature help
* Auto close signature help
* Position signature help above to not block completion
* Update signature help on backspace/insert mode delete
* Add lsp.auto-signature-help config option
* Add serde default annotation for LspConfig
* Show LSP inactive message only if signature help is invoked manually
* Do not assume valid signature help response from LSP
Malformed LSP responses are common, and these should not crash the
editor.
* Check signature help capability before sending request
* Reuse Open enum for PositionBias in popup
* Close signature popup and exit insert mode on escape
* Add config to control signature help docs display
* Use new Margin api in signature help
* Invoke signature help on changing to insert mode
* feat(statusline): add the file type (language id) to the status line
* refactor(statusline): move the statusline implementation into an own struct
* refactor(statusline): split the statusline implementation into different functions
* refactor(statusline): Append elements using a consistent API
This is a preparation for the configurability which is about to be
implemented.
* refactor(statusline): implement render_diagnostics()
This avoid cluttering the render() function and will simplify
configurability.
* feat(statusline): make the status line configurable
* refactor(statusline): make clippy happy
* refactor(statusline): avoid intermediate StatusLineObject
Use a more functional approach to obtain render functions and write to
the buffers, and avoid an intermediate StatusLineElement object.
* fix(statusline): avoid rendering the left elements twice
* refactor(statusline): make clippy happy again
* refactor(statusline): rename `buffer` into `parts`
* refactor(statusline): ensure the match is exhaustive
* fix(statusline): avoid an overflow when calculating the maximal center width
* chore(statusline): Describe the statusline configurability in the book
* chore(statusline): Correct and add documentation
* refactor(statusline): refactor some code following the code review
Avoid very small helper functions for the diagnositcs and inline them
instead.
Rename the config field `status_line` to `statusline` to remain
consistent with `bufferline`.
* chore(statusline): adjust documentation following the config field refactoring
* revert(statusline): revert regression introduced by c0a1870
* chore(statusline): slight adjustment in the configuration documentation
* feat(statusline): integrate changes from #2676 after rebasing
* refactor(statusline): remove the StatusLine struct
Because none of the functions need `Self` and all of them are in an own
file, there is no explicit need for the struct.
* fix(statusline): restore the configurability of color modes
The configuration was ignored after reintegrating the changes of #2676
in 8d28f95.
* fix(statusline): remove the spinner padding
* refactor(statusline): remove unnecessary format!()
Ctrl-based shortcuts are common in numerous applications.
This change:
- Adds Ctrl+{Left/Right/Backspace/Delete} for word-wise movement/deletion in prompt, picker, …
- Removes Alt-Left and Alt-Right in prompt, picker, …
- Adds Alt-Delete in insert mode for forward word deletion
In some terminals, Alt-Backspace might not work because it is ambigous.
See: https://github.com/helix-editor/helix/pull/2193#issuecomment-1105042501
Hence, Alt alternative is not removed.
* Refactor menu::Item to accomodate external state
Will be useful for storing editor state when reused by pickers.
* Add some type aliases for readability
* Reuse menu::Item trait in picker
This opens the way for merging the menu and picker code in the
future, since a picker is essentially a menu + prompt. More
excitingly, this change will also allow aligning items in the
picker, which would be useful (for example) in the command palette
for aligning the descriptions to the left and the keybinds to
the right in two separate columns.
The item formatting of each picker has been kept as is, even though
there is room for improvement now that we can format the data into
columns, since that is better tackled in a separate PR.
* Rename menu::Item::EditorData to Data
* Call and inline filter_text() in sort_text() completion
* Rename diagnostic picker's Item::Data
* Sort themes by score & then name
Previously the themes were appearing unordered after typing ':theme '.
This sorts them first by fuzzy score and then by name so that they
generally appear in a more ordered fashion in the initial list.
The sort by name does not really pay off when there is a score so an
alternative approach would be to sort by name if there is string to
fuzzy match against and otherwise sort by score.
I've lowercased the names as that avoids lower case & upper case letters
being sorted into separate groups. There might be a preferable approach
to that though.
* Sort language & files by score then name
And change to use sort_unstable_by instead of sort_unstable_by_key as it
allows us to avoid some allocations.
I don't fully understand the flow of the 'filename_impl' function but
this seems to deliver the desired results.
* Remove unnecessary reference
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Add mode specific styles
In similar vein to neovim's lualine and similar statusline packages this
allows helix users to style their mode based on which mode it is thus
making each mode more visually distinct at a glance
* Add an example based on rosepine
* Add editor.colors-mode config
* Document statusline mode styles
* Add workspace and document diagnostics picker
fixes#1891
* Fix some of @archseer's annotations
* Add From<&Spans> impl for String
* More descriptive parameter names.
* Adding From<Cow<str>> impls for Span and Spans
* Add new keymap entries to docs
* Avoid some clones
* Fix api change
* Update helix-term/src/application.rs
Co-authored-by: Bjorn Ove Hay Andersen <bjrnove@gmail.com>
* Fix a clippy hint
* Sort diagnostics first by URL and then by severity.
* Sort diagnostics first by URL and then by severity.
* Ignore missing lsp severity entries
* Add truncated filepath
* Typo
* Strip cwd from paths and use url-path without schema
* Make tests a doctest
* Better variable names
Co-authored-by: Falco Hirschenberger <falco.hirschenberger@itwm.fraunhofer.de>
Co-authored-by: Bjorn Ove Hay Andersen <bjrnove@gmail.com>
- Simplified match statements by destructuring MouseEvent struct
at the top and then matching on event.kind.
- Extracted out closures for calculating (1) position and view
of mouse click and (2) gutter coordinates and view of mouse click.
* Add single width left margin for completion popup
* Clear with ui.menu style before rendering menu
When rendering a completion popup, the popup component will clear
the area with ui.popup and then the menu component would draw over
it using a table component. We remove the left edge of the area
before passing it to the table component (so that it will be left
as padding), and the table component uses ui.menu as the style.
If ui.menu and ui.popup are different the left edge of the popup
will look different from the rest of the popup. We avoid this by
clearing the whole area with ui.menu in Menu::render
* check selection's visible width when copying on mouse click
Mouse-click-up copies the selection produced by dragging. The event
is ignored if the selection has a width of 1 though so you don't
copy when clicking rather than dragging. The current check copies
text when it has a visible width of 1 but is actually multiple
characters in the rope like a CRLF line-ending. With this change
we check the unicode width of the character(s) in the selection
rather than the range length, so clicking on a CRLF line-ending
does not copy.
* use range.fragment to simplify getting the primary selection width
The scrollbar length used to increase with more entries in the menu,
which was counter-intuitive to how scrollbars worked in most
applications. Turns out there was a typo in the floor division
implementation :)
The command palette previously used + as a delimiter for denoting
a single key in a key sequence, (like C+w). This was at odds with
how the statusline displayed them with pending keys (like <C-w>).
This patch changes the palette formatting to the statusline formatting
* Default rulers color to red
Currently if the theme a user is using doesn't have `ui.virtual.rulers`
set and they set up a ruler it just fails silently making it really hard
to figure out what went wrong. Did they set incorrectly set the ruler?
Are they using an outdated version of Helix that doesn't support rulers?
This happened to me today, I even switched to the default theme with
the assumption that maybe my theme just doesn't have the rulers setup
properly and it still didn't work.
Not sure if this is a good idea or not, feel free to suggest better
alternatives!
* Use builtin Style methods instead of Bevy style defaults
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Only default the style if there's no ui or ui.virtual
* Update themes style from ui.virtual to ui.virtual.whitespace
* Revert ui.virtual change in onelight theme
* Prefer unwrap_or_else
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
- Add file-picker.follow-symlinks configuration option (default is true), this
also controls if filename and directory completers follow symlinks.
- Update FilePicker to set editor error if opening a file fails, instead of
panicing.
Fix#1548Fix#2246
* feat(theme): add separate diagnostic colors
This commit adds separate diagnostic highlight colors for the different
types of LSP severities. If the severity type doesn't exist or is
unknown, we use some fallback coloring which was in use before this
commit.
Some initial color options were also added in the theme.toml
Resolves issue #2157
* feat(theme): add docs for new diagnostic options
* feat(theme): adjust defaults & reduce redundancy
- the different colors for different diagnostic severities are now
disabled in the default theme, instead diagnostics are just generally
underlined (as prior to the changes of this feature)
- the theme querying is now done once instead of every iteration in the
loop of processing every diagnostic message
* support insert register in prompt
* use next_char_handler instead of a flag
* Fix clippy issue
* show autoinfo when inserting register
* Revert "show autoinfo when inserting register"
This reverts commit 5488344de1.
* use completion instead of autoinfo
autoinfo is overlapped when using prompt
* recalculate_completion after inserting register
* Update helix-term/src/ui/prompt.rs
Co-authored-by: Ivan Tham <pickfire@riseup.net>
Co-authored-by: Ivan Tham <pickfire@riseup.net>
Allow tab-completion to continue when there is only a single, unambigous
completion target which is a directory. This allows e.g. nested directories
to be quickly drilled down just by hitting <tab> instead of first selecting
the completion then hitting <enter>.
When fiddling with paths in a :o prompt, one usually would want Ctrl-W to erase a path segment
rather than the whole path. This is how Ctrl-W works in e.g. (neo)vim out of the box.
During a single HighlightEvent::Source, the highlight spans do not
change and we can merge them into a single style at the beginning
of the event and use it instead of re-computing it for every grapheme
* Add runtime language configuration (#1794)
* Add set-language typable command to change the language of current buffer.
* Add completer for available language options.
* Update set-language to refresh language server as well
* Add language id based config lookup on `syntax::Loader`.
* Add `Document::set_language3` to set programming language based on language
id.
* Update `Editor::refresh_language_server` to try language detection only if
language is not already set.
* Remove language detection from Editor::refresh_language_server
* Move document language detection to where the scratch buffer is saved.
* Rename Document::set_language3 to Document::set_language_by_language_id.
* Remove unnecessary clone in completers::language
Currently, the picker's re-using a few bindings which are also present
in the prompt. This causes some editing behaviours to not function on
the picker.
**Ctrl + k** and **Ctrl + j**
This should kill till the end of the line on prompt, but is overridden
by the picker for scrolling. Since there are redundancies (`Ctrl + p`,
`Ctrl + n`), we can remove it from picker.
**Ctrl + f** and **Ctrl + b**
This are used by the prompt for back/forward movement. We could modify
it to be Ctrl + d and Ctrl + u, to match the `vim` behaviour.
This avoids costly conversions via byte_to_char (which are then
reversed back into bytes internally in Ropey).
Reduces time spent in slice/byte_to_char from ~24% to ~5%.
When the picker results output is empty, movement actions result in a panic:
```
thread 'main' panicked at 'attempt to calculate the remainder with a divisor of zero', helix-term/src/ui/picker.rs:420:31
note: run with `RUST_BACKTRACE=1` environment variable to display a backtrace
```
This could be a no-op instead when the matches length is zero.
This is a rather large refactor that moves most of the code for
loading, fetching, and building grammars into a new helix-loader
module. This works well with the [[grammars]] syntax for
languages.toml defined earlier: we only have to depend on the types
for GrammarConfiguration in helix-loader and can leave all the
[[language]] entries for helix-core.
Michael Davis
Charlie Groves
Pascal Kuthe
Skyler Hawthorne
A-Walrus
Poliorcetics
Blaž Hrastnik
Gokul Soumya
A-Walrus
Robin
Ivan Tham
Joshua Pauline
PeepNSheep
ChrHorn
Pascal Kuthe
Joe
aaron404
Saber Haj Rabiee
Frojdholm
Lucy
Clay
Matthias Deiml
Omnikar
Seth Bromberger
Alexis Kalabura
Bob
Mr. E
Benoît Cortier
Michael Jones
Mathspy
Falco Hirschenberger
Tobias Menzi
Mathis Brossier
Roland Kovacs
kyrime
Robert Walter
unrelentingtech
chunghha
adaliaramon
Thomas
Andrey Tkachenko
Dr. David A. Kunz
Rohan Jain
Joe
nibon7