* Clamp highlighting range to be within document
This fixes a panic possible when two vsplits of the same document
exist and enough lines are deleted from the document so that one of
the windows focuses past the end of the document.
* Ensure cursor is in view on window change
If two windows are editing the same document, one may delete enough of
the document so that the other window is pointing at a blank page (past
the document end). In this change we ensure that the cursor is within
view whenever we switch to a new window (for example with `<C-w>w`).
* Update helix-term/src/ui/editor.rs
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
Most commands that accept an argument show their current value if no
argument is specified. The `:theme` command previously displayed an
error message in the status bar if not provided with an argument:
```
Theme name not provided
```
It now shows the current theme name in the status bar if no argument is
specified.
Signed-off-by: James O. D. Hunt <jamesodhunt@gmail.com>
Signed-off-by: James O. D. Hunt <jamesodhunt@gmail.com>
* Autosave all when the terminal loses focus
* Correct comment on focus config
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Need a block_try_flush_writes in all quit_all paths
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Fix test::print for Unicode
The print function was not generating correct translations when
the input has Unicode (non-ASCII) in it. This is due to its use of
String::len, which gives the length in bytes, not chars.
* Fix multi-code point auto pairs
The current code for auto pairs is counting offsets by summing the
length of the open and closing chars with char::len_utf8. Unfortunately,
this gives back bytes, and the offset needs to be in chars.
Additionally, it was discovered that there was a preexisting bug where
the selection was not computed correctly in the case that the cursor
was:
1. a single grapheme in width
2. this grapheme was more than one char
3. the direction of the cursor is backwards
4. a secondary range
In this case, the offset was not being added into the anchor. This was
fixed.
* migrate auto pairs tests to integration
* review comments
This was not distinguishing the error types when trying a receive on an empty
receiver, which was erroneously causing the sender to be closed when trying to
flush the writes when there were none
If a document is written with a new path, currently, in the event that
the write fails, the document still gets its path changed. This fixes
it so that the path is not updated unless the write succeeds.
The way that document writes are handled are by submitting them to the
async job pool, which are all executed opportunistically out of order. It
was discovered that this can lead to write inconsistencies when there
are multiple writes to the same file in quick succession.
This seeks to fix this problem by removing document writes from the
general pool of jobs and into its own specialized event. Now when a
user submits a write with one of the write commands, a request is simply
queued up in a new mpsc channel that each Document makes to handle its own
writes. This way, if multiple writes are submitted on the same document,
they are executed in order, while still allowing concurrent writes for
different documents.
Undo/redo/earlier/later call `Document::apply_impl` which applies
transactions to the document. These transactions also need to be
applied to the view as in 0aedef0.
It is easy to forget to call `Document::apply` and/or `View::apply` in
the correct order. This commit introduces a helper function which
closes over both calls.
This change adds View::apply calls for all Document::apply call-sites,
ensuring that changes to a document do not leave invalid entries in
the View's jumplist.
Applying a transaction to a View adjusts the ranges in the jumplist
to ensure that they remain within the text of the document and follow
regular selection invariants (for example, must be have a width of at
least one).
* Implement cursorcolumn
* Add documentation
* Separate column style from line with fallback
* Fallback to cursorcolumn first
* Switch to non-fallback try_get_exact
Add new function `try_get_exact`, which doesn't perform fallback,
and use that instead because the fallback behaviour is being handled
manually.
This change automatically tracks pending text for for commands which use
on-next-key callbacks. For example, `t` will await the next key event
and "t" will be shown in the bottom right-hand corner to show that we're
in a pending state.
Previously, the text for these on-next-key commands needed to be
hard-coded into the command definition which had some drawbacks:
* It was easy to forget to write and clear the pending text.
* If a command was remapped in a custom config, the pending text would
still show the old key.
With this change, pending text is automatically tracked based on the
key events that lead to the command being executed. This works even
when the command is remapped in config and when the on-next-key
callback is nested under some key sequence (for example `mi`).
* Change focus to modified docs on quit
When quitting with modified documents, automatically switch focus to
one of them.
* Update helix-term/src/commands/typed.rs
Co-authored-by: Poliorcetics <poliorcetics@users.noreply.github.com>
* Make it work with buffer-close-all and the like
* Cleanup
Use Cow instead of String, and rename DoesntExist -> DoesNotExist
Co-authored-by: Poliorcetics <poliorcetics@users.noreply.github.com>
* Add option to skip the first indent guide
* reorder skip_first option
* change indent-guides.skip_first to a number
* rename skip -> skip_levels
* add skip_levels to the book
* Update book/src/configuration.md
Co-authored-by: A-Walrus <58790821+A-Walrus@users.noreply.github.com>
* Update helix-term/src/ui/editor.rs
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
Co-authored-by: Robin <robinvandijk@klippa.com>
Co-authored-by: A-Walrus <58790821+A-Walrus@users.noreply.github.com>
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Add RawTheme to handle inheritance with theme palette
* Add a intermediate step in theme loading
it uses RawTheme struct to load the original ThemePalette, so we can merge it with the inherited one.
* Load default themes via RawThemes, remove Theme deserialization
* Allow naming custom theme same as inherited one
* Remove RawTheme and use toml::Value directly
* Resolve all review changes resulting in a cleaner code
* Simplify return for Loader::load
* Add implementation to avoid extra step for loading of base themes
Underline styles are mutally exclusive and overwrite each other.
Therefore implementing as an modifier lead to incorrect behaviour
when the underline style is overwritten.
For backwards compatability the "underline" modified is retained (but
deprecated). Instead the "underline_style" and "underline_color"
optios should be used to style underlines.
Applying document-change transactions to diagnostic ranges is not stable
with respect to the ordering of diagnostics. This can cause diagnostics
to become temporarily unordered with some edits to a document, which can
eventually break some invariants/assumptions in syntax::merge.
With this change, Document::diagnostics are always sorted.
Currently it is not possible to save a file with a language that
has an external formatter configuration unless the external
formatter is installed, even if the language has a Language Server
configuration capable of auto-format. This change checks that the
external formatter exists before using it to create a formatting
callback.
* Derive Document language name from `languages.toml` `name` key
This changes switches from deriving the language name from the
`languages.toml` `scope` key to `name` (`language_id` in the
`LanguageConfiguration` type). For the most part it works to derive the
language name from scope by chopping off `source.` or `rsplit_once` on
`.` but for some languages we have now like html (`text.html.basic`),
it doesn't. This also should be a more accurate fallback for the
`language_id` method which is used in LSP and currently uses the
`rsplit_once` strategy.
Here we expose the language's name as `language_name` on `Document` and
replace ad-hoc calculations of the language name with the new method.
This is most impactful for the `file-type` statusline element which is
using `language_id`.
* Use `Document::language_name` for the `file-type` statusline element
The `file-type` indicator element in the statusline was using
`Document::language_id` which is meant to be used to for telling
Language Servers what language we're using. That works for languages
with `language-server` configurations in `languages.toml` but shows
text otherwise. The new `Document::language_name` method from the
parent commit is a more accurate way to determine the language.
Ported over from 61365dfbf3 in the `gui` branch. This will allow
adding our own events, most notably an idle timer event (useful
for adding debounced input in [dynamic pickers][1] used by interactive
global search and workspace symbols).
[1]: https://github.com/helix-editor/helix/pull/3110
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Change default formatter for any language
* Fix clippy error
* Close stdin for Stdio formatters
* Better indentation and pattern matching
* Return Result<Option<...>> for fn format instead of Option
* Remove unwrap for stdin
* Handle FormatterErrors instead of Result<Option<...>>
* Use Transaction instead of LspFormatting
* Use Transaction directly in Document::format
* Perform stdin type formatting asynchronously
* Rename formatter.type values to kebab-case
* Debug format for displaying io::ErrorKind (msrv fix)
* Solve conflict?
* Use only stdio type formatters
* Remove FormatterType enum
* Remove old comment
* Check if the formatter exited correctly
* Add formatter configuration to the book
* Avoid allocations when writing to stdin and formatting errors
* Remove unused import
Co-authored-by: Gokul Soumya <gokulps15@gmail.com>
* add statusline element to display file line endings
* run cargo fmt --all
* change the word *ending* from plural to singular
* support for the unicode-lines feature flag
* Add lsp signature help
* Do not move signature help popup on multiple triggers
* Highlight current parameter in signature help
* Auto close signature help
* Position signature help above to not block completion
* Update signature help on backspace/insert mode delete
* Add lsp.auto-signature-help config option
* Add serde default annotation for LspConfig
* Show LSP inactive message only if signature help is invoked manually
* Do not assume valid signature help response from LSP
Malformed LSP responses are common, and these should not crash the
editor.
* Check signature help capability before sending request
* Reuse Open enum for PositionBias in popup
* Close signature popup and exit insert mode on escape
* Add config to control signature help docs display
* Use new Margin api in signature help
* Invoke signature help on changing to insert mode
* feat(statusline): add the file type (language id) to the status line
* refactor(statusline): move the statusline implementation into an own struct
* refactor(statusline): split the statusline implementation into different functions
* refactor(statusline): Append elements using a consistent API
This is a preparation for the configurability which is about to be
implemented.
* refactor(statusline): implement render_diagnostics()
This avoid cluttering the render() function and will simplify
configurability.
* feat(statusline): make the status line configurable
* refactor(statusline): make clippy happy
* refactor(statusline): avoid intermediate StatusLineObject
Use a more functional approach to obtain render functions and write to
the buffers, and avoid an intermediate StatusLineElement object.
* fix(statusline): avoid rendering the left elements twice
* refactor(statusline): make clippy happy again
* refactor(statusline): rename `buffer` into `parts`
* refactor(statusline): ensure the match is exhaustive
* fix(statusline): avoid an overflow when calculating the maximal center width
* chore(statusline): Describe the statusline configurability in the book
* chore(statusline): Correct and add documentation
* refactor(statusline): refactor some code following the code review
Avoid very small helper functions for the diagnositcs and inline them
instead.
Rename the config field `status_line` to `statusline` to remain
consistent with `bufferline`.
* chore(statusline): adjust documentation following the config field refactoring
* revert(statusline): revert regression introduced by c0a1870
* chore(statusline): slight adjustment in the configuration documentation
* feat(statusline): integrate changes from #2676 after rebasing
* refactor(statusline): remove the StatusLine struct
Because none of the functions need `Self` and all of them are in an own
file, there is no explicit need for the struct.
* fix(statusline): restore the configurability of color modes
The configuration was ignored after reintegrating the changes of #2676
in 8d28f95.
* fix(statusline): remove the spinner padding
* refactor(statusline): remove unnecessary format!()
* Add mode specific styles
In similar vein to neovim's lualine and similar statusline packages this
allows helix users to style their mode based on which mode it is thus
making each mode more visually distinct at a glance
* Add an example based on rosepine
* Add editor.colors-mode config
* Document statusline mode styles
* Add workspace and document diagnostics picker
fixes#1891
* Fix some of @archseer's annotations
* Add From<&Spans> impl for String
* More descriptive parameter names.
* Adding From<Cow<str>> impls for Span and Spans
* Add new keymap entries to docs
* Avoid some clones
* Fix api change
* Update helix-term/src/application.rs
Co-authored-by: Bjorn Ove Hay Andersen <bjrnove@gmail.com>
* Fix a clippy hint
* Sort diagnostics first by URL and then by severity.
* Sort diagnostics first by URL and then by severity.
* Ignore missing lsp severity entries
* Add truncated filepath
* Typo
* Strip cwd from paths and use url-path without schema
* Make tests a doctest
* Better variable names
Co-authored-by: Falco Hirschenberger <falco.hirschenberger@itwm.fraunhofer.de>
Co-authored-by: Bjorn Ove Hay Andersen <bjrnove@gmail.com>
The command palette previously used + as a delimiter for denoting
a single key in a key sequence, (like C+w). This was at odds with
how the statusline displayed them with pending keys (like <C-w>).
This patch changes the palette formatting to the statusline formatting
* feat: make `move_vertically` aware of tabs and wide characters
* refactor: replace unnecessary checked_sub with comparison
* refactor: leave pos_at_coords unchanged and introduce separate pos_at_visual_coords
* style: include comment to explain `pos_at_visual_coords` breaking condition
* refactor: use `pos_at_visual_coords` in `text_pos_at_screen_coords`
* feat: make `copy_selection_on_line` aware of wide characters
* Display highest severity diagnostic in gutter
* Improve gutter diagnostic performance
Very slight improvement (doesn't really make a difference), iterates over the diagnostics of the line
once instead of twice.
* Add comment justifying unwrap
When a new View of a Document is created, a default cursor of 0, 0 is
created, and it does not get normalized to a single width cursor until
at least one movement of the cursor happens. This appears to have no
practical negative effect that I could find, but it makes tests difficult
to work with, since the initial selection is not what you expect it to be.
This changes the initial selection of a new View to be the width of the
first grapheme in the text.
* Use new macro syntax for encoding sequences of keys
* Make convenience helpers for common test pattern
* Use indoc for inline indented raw strings
* Add feature flag for integration testing to disable rendering
- Add file-picker.follow-symlinks configuration option (default is true), this
also controls if filename and directory completers follow symlinks.
- Update FilePicker to set editor error if opening a file fails, instead of
panicing.
Fix#1548Fix#2246
* allows passing extra formatting options to LSPs
- adds optional field 'format' to [[language]] sections in 'languages.toml'
- passes specified options the LSPs via FormattingOptions
* cleaner conversion of formatting properties
* move formatting options inside lsp::Client
* cleans up formatting properties merge
In certain circumstances it was possible to get into an infinite loop
when replaying macros such as when different macros attempt to replay
each other.
This commit adds changes to track which macros are currently being
replayed and prevent getting into infinite loops.
* Fix panic on close last buffer (#2367)
In certain circumstances it was possible to cause a panic when closing
buffers due to some mishandling of view document history.
A change has been made to delete removed documents from the history of
accessed documents for each view. The ensures we don't attempt to jump
to a deleted document by mistake.
* Move remove document code into View function 'remove_document'
* Replace 'view.jumps.remove' call with 'view.remove_document' call
This line uses the Display trait for io::ErrorKind which was
stabilized in Rust 1.60.0. We can set MSRV all the way back to
1.57.0 by replacing it with a pretty-print.
Closes#2460.
* add Tree::swap_split_in_direction()
* add swap_view_{left,down,up,right} commands, bound to H,J,K,L
respectively in the Window menu(s)
* add test for view swapping
Change the layout of existing split view from horizontal to vertical and
vica-versa. It only effects the focused view and its siblings, i.e. not
recursive.
Command is mapped to 't' or 'C-t' under the Window menus.
Inserting these with the `HashMap::insert` method evades the call
to `Selection::ensure_invariants`. The effect is that the scratch
buffer (or other buffers opened through these code-paths) can start
with a selection at (0, 0), when a file with equivalent contents ("\n")
would start with (0, 1).
I.e.:
hx
and
touch f
hx f
start with different selections even though they have an equivalent
Rope. With this change they both start with (0, 1).
* feat(commands): better handling of buffer-close
Previously, when closing buffer, you would loose cursor position in other docs.
Also, all splits where the buffer was open would be closed.
This PR changes the behavior, if the view has also other buffer
previously viewed it switches back to the last one instead of the view
being closed. As a side effect, since the views are persisted,
the cursor history is persisted as well.
Fixes: https://github.com/helix-editor/helix/issues/1186
* Adjust buffer close behavior
* Remove closed documents from jump history
* Fix after rebase
* Make `:write` create nonexistent subdirectories
Prompting as to whether this should take place remains a TODO.
* Move subdirectory creation to new `w!` command
* Add runtime language configuration (#1794)
* Add set-language typable command to change the language of current buffer.
* Add completer for available language options.
* Update set-language to refresh language server as well
* Add language id based config lookup on `syntax::Loader`.
* Add `Document::set_language3` to set programming language based on language
id.
* Update `Editor::refresh_language_server` to try language detection only if
language is not already set.
* Remove language detection from Editor::refresh_language_server
* Move document language detection to where the scratch buffer is saved.
* Rename Document::set_language3 to Document::set_language_by_language_id.
* Remove unnecessary clone in completers::language
* feat(clipboard): reintroduce win32yank for wsl2 linux
* refactor(clipboard): adjust win32yank position to not interrupt wayland/x11
Co-authored-by: jiqb <gthbji@ml1.net>
* Move top level lsp config to editor.lsp
This is mainly done to accomodate the new lsp.signature-help config
option that will be introduced in https://github.com/helix-editor/helix/pull/1755
which will have to be accessed by commands. The top level config
struct is split and moved to different places, making the relocation
necessary
* Revert rebase slipup
* add basic completion replay
* use transaction as the last completion
* completion replay only on trigger position
* cache changes in CompletionAction
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* Show infobox to hint textobjects with `mi` and `ma`
* Add note to infobox than any pair of characters will work too
The wording could probably be a little more clear, but I wanted to
keep it short but still accurate.
* Don't allocate a vec for the static help text
* Fix bug where `mi<esc>` would swallow next input and persist infobox
* Better help text for arbitrary pair matching in textobject selection
* Add way to add fake pending key data below status, use with `mi`/`ma`
This is a bit hacky as it makes use of global state which will end
up managed in multiple places, but has precedent in the way autoinfo
works. There should probably be a bigger refactor to handle this
kind of state better.
* Return early on anything other than `mi` and `ma` for autoinfo
* Remove "ascii" from help text with `mi` and `ma`
* Update helix-term/src/ui/editor.rs
Co-authored-by: Blaž Hrastnik <blaz@mxxn.io>
* impl auto pairs config
Implements configuration for which pairs of tokens get auto completed.
In order to help with this, the logic for when *not* to auto complete
has been generalized from a specific hardcoded list of characters to
simply testing if the next/prev char is alphanumeric.
It is possible to configure a global list of pairs as well as at the
language level. The language config will take precedence over the
global config.
* rename AutoPair -> Pair
* clean up insert_char command
* remove Rc
* remove some explicit cloning with another impl
* fix lint
* review comments
* global auto-pairs = false takes precedence over language settings
* make clippy happy
* print out editor config on startup
* move auto pairs accessor into Document
* rearrange auto pair doc comment
* use pattern in Froms
* feat(commands): shrink_selection
Add `shrink_selection` command that can be used to shrink
previously expanded selection.
To make `shrink_selection` work it was necessary to add
selection history to the Document since we want to shrink
the selection towards the syntax tree node that was initially
selected.
Selection history is cleared any time the user changes
selection other way than by `expand_selection`. This ensures
that we don't get some funky edge cases when user calls
`shrink_selection`.
Related: https://github.com/helix-editor/helix/discussions/1328
* Refactor shrink_selection, move history to view
* Remove useless comment
* Add default key mapping for extend&shrink selection
* Rework contains_selection method
* Shrink selection without expand selects first child
Blaž Hrastnik
Michael Davis
Charlie Groves
dependabot[bot]
A-Walrus
James O. D. Hunt
Kirawi
Skyler Hawthorne
Matouš Dzivjak
A-Walrus
Filip Dutescu
Pascal Kuthe
Alexis (Poliorcetics) Bourget
Gokul Soumya
Brandon Dong
Robin
ath3
Joshua Pauline
PeepNSheep
Christoph Schmidler
Joe
aaron404
PiergiorgioZagaria
unrelentingtech
Kyle L. Davis
Omnikar
Amit Beka
Seth Bromberger
Ivan Tham
Mr. E
Bob
Alexis Kalabura
Mathspy
Falco Hirschenberger
Tobias Menzi
Termina94
Matthew Toohey
Henry
Bjorn Ove Hay Andersen
Roland Kovacs
farwyler
gavynriebau
Ryan Russell
unrelentingtech
chunghha
Thomas
Dr. David A. Kunz
جاد
Joe
Mateusz S. Szczygieł
Daniel S Poulin
Cole Helbling
Andrew Neth
Mathis Brossier
Kevin Sjöberg
Benoît Cortier